LK166
Home >> Supply >> GRT1-ID4 | OMRON CompoNet Communications Unit GRT1-ID4
Search
Information sort

GRT1-ID4 | OMRON CompoNet Communications Unit GRT1-ID4


Structure: plastic sealed.
Contact structure: 1C.
Coil rated voltage: DC6V.
Small, high sensitivity 1 pole signal relay.
Small size 12.5 (L) * 7.5 (W) * 10 (H) mm.
Wide range of contact switch area 1mA ~ 1A.
High sensitivity coil 150mW.
Plastic sealed type, excellent environmental performance GRT1-ID4.
Coil contact between the Part68 FCC staandard. (1500V, 10 * 160 s)Type: output module.
Insulation: photo coupler.
Zero crossing function: No.
Action display light: No GRT1-ID4.
Output rated voltage: AC100 3A ~ 240V.
Input rated voltage: DC4 ~ 24V.
Logic circuit and load interface.
I/O solid state relay.
With the input module (AC, DC), the output module (AC, DC) OMRON GRT1-ID4.
Product series, the color of each module to distinguish.
You can confirm the action of SSR by using the action display light GRT1-ID4.
Between input and output voltage 4000V. Loose wire cable /G79-A_C.
L size: 2000mm.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable OMRON GRT1-ID4. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: AC/DC 24V.
Global standard size,
low profile slim I/O relay with width 6 OMRON GRT1-ID4.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
sscrewdriver to achieve easier wiring work for stranded wires GRT1-ID4.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.

Related supply information