MITSUBISHI Q173CPUN User's Manual (Application) PDF

16 axes.
Connect SSCNET III.
Control unit: pulse.
Location data: 32 data / axis.
Ideal solution for simple multi axis positioning.
A variety of functions, such as positioning control, constant velocity control, and other positioning control systems Q173CPUN PDF.
The multi axis system is most suitable for simple positioning control.
Ideal selection for high speed linear positioning control in multi axis system Q173CPUN
Linear interpolation operation with up to 4 axes can be carried out.
With the electronic gear, gap compensation, absolute position system, such as basic positioning function. BASIC program execution module Q173CPUN PDF.
RS-232.
2 channel.
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns Q173CPUN PDF.
In addition to achieve in the paast with the control of single-chip high-speed control,
The system performance can be improved by reducing the total scan time,
To prevent any possible performance bias Q173CPUN Manual.
The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,
Starting from the programmable controller CPU to the second axis servo amplifier,
Time to output speed command of servo amplifier MITSUBISHI User's Manual.
This time is the index of data transmission speed between CPU.SRAM+E2PROM memory card.
RAM capacity: 128KB.
E2PROM capacity: 128KB. "4 axes, SSCNET connection type MITSUBISHI User's Manual.
2 axis /4 axis /3 axis linear interpolation.
2 axis interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
40 pin connector.
Easy to achieve high speed, high precision positioning control.
Support for multiple types of positioning control,
Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc MITSUBISHI User's Manual. .
In addition, can use thhe "Configurator-QP GX" and other software,
Easy to set, monitor and debug Q173CPUN User's Manual.
Saving wiring through SSCNET cable connections while simultaneously,
The length of the total cable distance up to 30m.
In addition, an absolute position systtem for determining the origin position is supported by the return data set operation of the origin Q173CPUN Manual.
No need for the near point block, such as wiring. "