OMRON CP1E-N20DT-A USER'S MANUAL (Communications Commands) PDF

100 to 120/200 to 240 VAC (switchable), Wired.Model: C200H-OA224.
No. of points: 12 pts.
Specifications: 0.5 A, 250VAC.Model: C200H-OD218.
No. of points: 32 pts CP1E-N20DT-A PDF.
Specifications: nit 4.5 VDC, 16 mA to 26.4 VDC, 100 mA. .
Weight: 180g max.4 Axis Position Control and Comprehensive Programmable Controller.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O CP1E-N20DT-A Model : CVM1-DRM21-V1.
CVM1/CV series for.Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 outputs;
Signal range selection:
Seet separately for each output CP1E-N20DT-A PDF CP1E-N20DT-A Manual.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA; 1/4,00.
Conversion period: 1 ms/point.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.3% of F.S. Current: ±0.5% of F.S.
External connection: Removable terminal block CP1E-N20DT-A PDF.
External power supply: 24 VDC +10% -15%, 200mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 24V, 0.2*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data OMRON USER'S MANUAL.
Analog Output Units for converting binary ,
data into analog output signals.
Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON USER'S MANUAL.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in thhe system CP1E-N20DT-A USER'S MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON USER'S MANUAL.
The Participation Flags and Communicatioons,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1E-N20DT-A Manual. Specifications: Coaxial cable(5C-2V cable).