LK166
Home >> Price >> YASKAWA >> SGD7S-120A30A002
Brand sort

YASKAWA SGD7S-120A30A002

Brand: YASKAWA
Country:
Name: Single axis servo driver
Price: 0
YASKAWA SGD7S-120A30A002
Sigma -V series servo motor SGMPS.
Rated output: 400W (0.4KW).
Power supply voltage: AC200V.
Serial encoder: 17 bit absolute value type (standard).
Design sequence: IP55 (standard).
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with hold brake (DC24V).
Corresponding to the RoHS instruction: in accordance with the RoHS directive SGD7S-120A30A002.
Medium inertia
Flat type deep short
Equipped with high resolution serial encoder (17 bit)
Max speed up to 6000r\/min
Variety is complete (100W ~ 1 SGD7S-120A30A0025kW, with hold brake)
Standard using IP55. Also applies to IP67 (optional).
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above SGD7S-120A30A002.
Using ambient temperature: 0 ~ 40 degrees C .
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection SGD7S-120A30A002.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationEven if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenServo motor SGMGH type .
Rated speed: 1500r\/min.
Power: 4.4kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit absolute value.
Design sequence: A.
Shaft end: straight shaft without key.
Optional parts: with oil seal, DC90V brake.
High speed feed series: high speed running when no load.
Complete separation of tthe main circuit andd the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain SGD7S-120A30A002.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number tthaan the original product reduced by 1\/2 SGD7S-120A30A002.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed control
SGD7S-120A30A002 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGD7S-120A30A002&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Single axis servo driver
SGD7S-120A00A001
Yaskawa Single axis servo driver SGD7S-120A00A001
Sigma -7 series servo unit SGD7S. Maximu
Yaskawa
Single axis servo driver
SGD7S-200A30A002
Yaskawa Single axis servo driver SGD7S-200A30A002
Single axis servo driver SGD7S. Maximum
Yaskawa
Single axis servo driver
SGD7S-R90A30A002
Yaskawa Single axis servo driver SGD7S-R90A30A002
Single axis servo driver SGD7S. Maximum
Yaskawa
Single axis servo driver
SGD7S-120A20A002
Yaskawa Single axis servo driver SGD7S-120A20A002
Single axis servo driver SGD7S. Maximum