LK166
Home >> Products >> MITSUBISHI >> Inverter >> FR-A800 series inverter >> FR-A820 inverter 3 phase 200V >> FR-A820-11K-1(FR-A820-00630-2-60) | MITSUBISHI FR-A820-11K-1(FR-A820-00630-2-60) Three phase 200V grade frequency converter

FR-A820-11K-1(FR-A820-00630-2-60) | MITSUBISHI FR-A820-11K-1(FR-A820-00630-2-60) Three phase 200V grade frequency converter

Brand: MITSUBISHI
Name: Three phase 200V grade frequency converter
Model: FR-A820-11K-1(FR-A820-00630-2-60)
MITSUBISHI inverter series: FR-A820.
Voltage level: three phase 200V.
Power: 11kw.
SLD converter rated current: 63A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
Parameters can be selected by 4 different rated current and different overload rating (SLD (ultra light load) rated, LD (light load) rating, ND (general load) rating, HD (weight).
Type load) for selection.
You can choose the most suitable frequency converter for use; and by selecting a transducer with a SLD or LD rated level,
Be able to reduce the size of the device (compared with the FR-A700 series, to reduce the volume of equipment).
For applications that require high torque at low speeds, the HD rating is the most suitable.
The controller is used to control and monitor the frequency converter through the network.
Standard corresponding RS-485 communication (MITSUBISHI converter protocol, Modbus-RTU protocol) data transmission speed up to 115200bps.

MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 15KW.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%) MITSUBISHI FR-A820-11K-1(FR-A820-00630-2-60) FR-A820-11K-1(FR-A820-00630-2-60)
Starting with power frequency power supply, the starting current is 6~7 times of the rated current, therefore, the impact on the mechanical and electrical.
The inverter drive can be smoothly start (start time longer).
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120% rated torque;
For the inverter with the torque automatic enhancement function, the starting torque is more than 100%, which can start with full load MITSUBISHI FR-A820-11K-1(FR-A820-00630-2-60). Power: 37kw.
Voltage: 400V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost MITSUBISHI FR-A820-11K-1(FR-A820-00630-2-60).
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving FR-A820-11K-1(FR-A820-00630-2-60) MITSUBISHI. Power: 3.7kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current FR-A820-11K-1(FR-A820-00630-2-60) MITSUBISHI.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor FR-A820-11K-1(FR-A820-00630-2-60) MITSUBISHI.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) MITSUBISHI inverter FR-L740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 5.5KW.
Integration of the three works the core technology, the outstanding performance of reeling, release the high cost of bright light.
Wide range of professional use and advanced control.
Professional built-in function to ensure the constant material tension, suitable for the application of printing and packaging industry.

Fusion application of the tension products of MITSUBISHI by inverter FR-A820-11K-1(FR-A820-00630-2-60).
Suitable for tension control of high precision cable and material processing occasions.
Professional function to ensure the safe operration of textile machinery equipment,
The spinning quality and production efficiency are improved MITSUBISHI FR-A820-11K-1(FR-A820-00630-2-60). The application of textile machinery and equipment.


...More relevant models >>>>
Related model