LK166
Home >> Products >> MITSUBISHI
MITSUBISHI
Input / output module
A1SH42


Type of input: DC leakage. Input points: 32 points. Input voltage: DC12/24. Input current: 3/7mA. Ou
MITSUBISHI
Input / output module
A1SH42P


Enter 32 points. 2/5mA DC12/24V. Response time: 10ms. 32 point 1 public. Output 32 points. DC12/24V.
MITSUBISHI
Input / output module
A1SH42P-S1


Enter 32 points. 5mA DC24V. Response time: 0.3ms. 32 point 1 public. Output 32 points. DC12/24V. Lea
MITSUBISHI
Input / output module
A1SH42-S1


Enter 64 points. Above DC7V. Response time: 16ms. 16 pin connector. Output 64 points. Response time:
MITSUBISHI
CPU component
A1SHCPU


I/O control method: refresh mode or direct mode. User program storage capacity: 8K step. I/O points:
MITSUBISHI
High speed interrupt module
A1SI61


A1SI61 is designed to control the application of mechanical devices that require high speed response
MITSUBISHI
Main communication module
A1SJ51T64


Up to controlled I/O points: 8 point I/O combination module, up to 128 points. Use any I/O module, u
MITSUBISHI
DC input / relay output module
A1SJ-56DR


Input points: 32 points. Input voltage and current: 7mA DC24V. Input response time: 10ms. 16 point /
MITSUBISHI
DC input / crystal output module
A1SJ-56DT


Input points: 32 points. Input voltage and current: 7mA DC24V. Input response time: 10ms. 16 point /
MITSUBISHI
CC-Link module
A1SJ61BT11


Three remote components can be connected to the CC-LINK system. Remote I/O: refers to the field comp
MITSUBISHI
CC-Link module
A1SJ61QBT11


CC-Link master / slave station. PLC is the use of " sequential scanning, and constantly circulating
MITSUBISHI
Melsecnet interface module
A1SJ71AP21


PLC station distance: 1Km. Cable type: QSI-200/250. The function of the MELSECNET interface module i