ype Model Outline
CPU module
: Product available soon
High-speed Universal model QCPU | Q03UDVCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 30K steps, basic operation processing speed (LD instruction): 1.9 ns, program memory capacity: 120 KB, peripheral connection ports: USB, Ethernet (Predefined protocol support function), memory card I/F: SD memory card and extended SRAM cassette | |
Q04UDVCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 40K steps, basic operation processing speed (LD instruction): 1.9 ns, program memory capacity: 160 KB, peripheral connection ports: USB, Ethernet (Predefined protocol support function), memory card I/F: SD memory card and extended SRAM cassette | ||
Q06UDVCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60K steps, basic operation processing speed (LD instruction): 1.9 ns, program memory capacity: 240 KB, peripheral connection ports: USB, Ethernet (Predefined protocol support function), memory card I/F: SD memory card and extended SRAM cassette | ||
Q13UDVCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 130K steps, basic operation processing speed (LD instruction): 1.9 ns, program memory capacity: 520 KB, peripheral connection ports: USB, Ethernet (Predefined protocol support function), memory card I/F: SD memory card and extended SRAM cassette | ||
Q26UDVCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 260K steps, basic operation processing speed (LD instruction): 1.9 ns, program memory capacity: 1040 KB, peripheral connection ports: USB, Ethernet (Predefined protocol support function), memory card I/F: SD memory card and extended SRAM cassette | ||
Universal model QCPU | Q00UJCPU | No. of I/O points: 256 points, no. of I/O device points: 8192 points, program capacity: 10K steps, basic operation processing speed (LD instruction): 120 ns, program memory capacity: 40 KB, peripheral connection ports: USB and RS-232, no memory card I/F, 5-slot base, with 100?40 V AC input/5 V DC/3 A output power supply | |
Q00UCPU | No. of I/O points: 1024 points, no. of I/O device points: 8192 points, program capacity: 10K steps, basic operation processing speed (LD instruction): 80 ns, program memory capacity: 40 KB, peripheral connection ports: USB and RS-232, no memory card I/F | ||
Q01UCPU | No. of I/O points: 1024 points, no. of I/O device points: 8192 points, program capacity: 15K steps, basic operation processing speed (LD instruction): 60 ns, program memory capacity: 60 KB, peripheral connection ports: USB and RS-232, no memory card I/F | ||
Q02UCPU | No. of I/O points: 2048 points, no. of I/O device points: 8192 points, program capacity: 20K steps, basic operation processing speed (LD instruction): 40 ns, program memory capacity: 80 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q03UDCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 30K steps, basic operation processing speed (LD instruction): 20 ns, program memory capacity: 120 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q04UDHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 40K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 160 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q06UDHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 240 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q10UDHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 100K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 400 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q13UDHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 130K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 520 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q20UDHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 200K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 800 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q26UDHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 260K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 1040 KB, multiple CPU high-speed communication, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Built-in Ethernet type | Q03UDECPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 30K steps, basic operation processing speed (LD instruction): 20 ns, program memory capacity: 120 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | |
Q04UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 40K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 160 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q06UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 240 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q10UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 100K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 400 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q13UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 130K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 520 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q20UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 200K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 800 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q26UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 260K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 1040 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q50UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 500K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 2000 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q100UDEHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 1000K steps, basic operation processing speed (LD instruction): 9.5 ns, program memory capacity: 4000 KB, multiple CPU high-speed communication, peripheral connection ports: USB and Ethernet, memory card IF: SRAM card, FLASH card, and ATA card | ||
Note: General specifications and product guarantee conditions of jointly developed products are different from those of MELSEC products. For more information, please refer to the product manuals or contact your local Mitsubishi representative for details.
CPU module
Basic model QCPU | Q00JCPU | No. of I/O points: 256 points, no. of I/O device points: 2048 points, program capacity: 8K steps, basic operation processing speed (LD instruction): 200 ns, program memory capacity: 58 KB, peripheral connection ports: RS-232, no memory card I/F, 5-slot base, with 100?40 V AC input/5 V DC/3 A output power supply | |
Q00CPU | No. of I/O points: 1024 points, no. of I/O device points: 2048 points, program capacity: 8K steps, basic operation processing speed (LD instruction): 160 ns, program memory capacity: 94 KB, peripheral connection ports: RS-232, no memory card I/F | ||
Q01CPU | No. of I/O points: 1024 points, no. of I/O device points: 2048 points, program capacity: 14K steps, basic operation processing speed (LD instruction): 100 ns, program memory capacity: 94 KB, peripheral connection ports: RS-232, no memory card I/F | ||
High Performance model QCPU | Q02CPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 28K steps, basic operation processing speed (LD instruction): 79 ns, program memory capacity: 112 KB, peripheral connection ports: RS-232, memory card IF: SRAM card, FLASH card, and ATA card | |
Q02HCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 28K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 112 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q06HCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 240 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q12HCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 124K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 496 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q25HCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 252K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 1008 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Process CPU | Q02PHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 28K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 112 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | |
Q06PHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 60K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 240 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q12PHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 124K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 496 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Q25PHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 252K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 1008 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Redundant CPU | Q12PRHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 124K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 496 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | |
Q25PRHCPU | No. of I/O points: 4096 points, no. of I/O device points: 8192 points, program capacity: 252K steps, basic operation processing speed (LD instruction): 34 ns, program memory capacity: 1008 KB, peripheral connection ports: USB and RS-232, memory card IF: SRAM card, FLASH card, and ATA card | ||
Tracking cable | QC10TR | Tracking cable 1 m | |
QC30TR | Tracking cable 3 m | ||
C Controller CPU | Q24DHCCPU-V | No. of I/O points: 4096 points, endian format: little endian, removable storage: SD memory card, OS: VxWorks® Version 6.8.1 | |
Q24DHCCPU-LS | No. of I/O points: 4096 points, endian format: little endian, removable storage: SD memory card, OS: No pre-installed operating system (Operating system installed by user) | ||
Q12DCCPU-V | No. of I/O points: 4096 points, endian format: little endian, removable storage: CompactFlash card, OS: VxWorks® Version 6.4 | ||
Q06CCPU-V | No. of I/O points: 4096 points, endian format: little endian, removable storage: CompactFlash card, OS: VxWorks® Version 5.4 | ||
Bundled product | Q24DHCCPU-V-B019 | C Controller (Q24DHCCPU-V) bundled with CIMSNIPER Q24 E, data collection package for EES/FDC/APC (equipped with Simple MES functionality) | |
Q24DHCCPU-V-B01D | C Controller (Q24DHCCPU-V) bundled with DNA Designer Q24 E, model based development support tool | ||
Q24DHCCPU-VG-B000 | C Controller (Q24DHCCPU-VG) bundled with GENWARE®3-VG Runtime License Version, runtime library is pre-installed | ||
Q24DHCCPU-VG-B002 | C Controller (Q24DHCCPU-VG) bundled with GENWARE®3-VG Tool License Version, GUI development environment (CI SKETCH-E) is bundled into the Runtime License version | ||
Q24DHCCPU-LS-B030 NEW | C Controller (Q24DHCCPU-LS) bundled with Lineo uLinux and uLinux Station, web-based application that enables basic Linux system configuration | ||
Q12DCCPU-V-B011 | C Controller (Q12DCCPU-V) bundled with CIMOPERATOR® SECS+ for ADVANCED E, supports SECS-I (SEMI E4), HSMS (SEMI E37) | ||
Q12DCCPU-V-B013 | C Controller (Q12DCCPU-V) bundled with CIMOPERATOR® SECS+ for GEM ADVANCED E, middle kit version that supports GEM (E30) (does not support Trace data collection, Limit monitoring, Document file output) | ||
Q12DCCPU-V-B015 | C Controller (Q12DCCPU-V) bundled with CIMOPERATOR® SECS+ for GEM ADVANCED (Option Pack) E, full kit version that supports GEM (E30) (supports Trace data collection, Limit monitoring, Document file output) | ||
Q12DCCPU-V-B019 | C Controller (Q12DCCPU-V) bundled with CIMSNIPER E, data collection package for EES/FDC/APC (equipped with Simple MES functionality) | ||
Q12DCCPU-V-B01B | C Controller (Q12DCCPU-V) bundled with CIMSNIPER Light E, data collection package for EES/FDC/APC (not equipped with Simple MES functionality) | ||
Q12DCCPU-V-B01D | C Controller (Q12DCCPU-V) bundled with DNA Designer E, model based development support tool | ||
Cable | Q12DCCPU-CBL*1*2*3 | RS-232 connection converter cable (custom mini-DIN to 9-pin D-sub connector) | |
*1: For use with Q24DHCCPU-V, Q24DHCCPU-VG.
*2: For use with Q24DHCCPU-LS.
*3: For use with Q12DCCPU-V.
Battery | Q6BAT | Replacement battery |
Q7BAT | Replacement large-capacity battery | |
Q7BAT-SET | Large-capacity battery with holder for installing CPU | |
Q8BAT | Replacement large-capacity battery module | |
Q8BAT-SET | Large-capacity battery module with CPU connection cable | |
Extended SRAM cassette | Q4MCA-1MBS*1 | Extended SRAM cassette, capacity: 1 MB |
Q4MCA-2MBS*1 | Extended SRAM cassette, capacity: 2 MB | |
Q4MCA-4MBS*1 | Extended SRAM cassette, capacity: 4 MB | |
Q4MCA-8MBS*1 | Extended SRAM cassette, capacity: 8 MB | |
SD memory card | NZ1MEM-2GBSD*1*2*3*4 NEW | SD memory card, capacity: 2 GB |
NZ1MEM-4GBSD*1*2*3*4 NEW | SDHC memory card, capacity: 4 GB | |
NZ1MEM-8GBSD*1*2*3*4 NEW | SDHC memory card, capacity: 8 GB | |
NZ1MEM-16GBSD*1*2*3*4 NEW | SDHC memory card, capacity: 16 GB | |
Memory card | Q2MEM-1MBS*5 | SRAM memory card, capacity: 1 MB |
Q2MEM-2MBS*5 | SRAM memory card, capacity: 2 MB | |
Q3MEM-4MBS*5 | SRAM memory card, capacity: 4 MB | |
Q3MEM-4MBS-SET*5 | SRAM memory card with cover, capacity: 4 MB | |
Q3MEM-8MBS*6 | SRAM memory card, capacity: 8 MB | |
Q3MEM-8MBS-SET*6 | SRAM memory card with cover, capacity: 8 MB | |
Q3MEM-CV | Memory card protective cover for the Universal model QCPU (comes with Q3MEM-4MBS-SET/Q3MEM-8MBS-SET) | |
Q3MEM-CV-H | Memory card protective cover for the High Performance model, Process, and Redundant CPUs (comes with Q3MEM-4MBS-SET) | |
Q2MEM-8MBA*5 | ATA card, capacity: 8 MB, to be discontinued (December 2016) | |
Q2MEM-16MBA*5 | ATA card, capacity: 16 MB | |
Q2MEM-32MBA*5 | ATA card, capacity: 32 MB | |
CompactFlash card | GT05-MEM-128MC*4*7 | CompactFlash card, capacity: 128 MB |
GT05-MEM-256MC*4*7 | CompactFlash card, capacity: 256 MB | |
QD81MEM-512MBC*4*7*8 | CompactFlash card, capacity: 512 MB | |
QD81MEM-1GBC*4*8 | CompactFlash card, capacity: 1 GB | |
QD81MEM-2GBC*4*8 | CompactFlash card, capacity: 2 GB | |
QD81MEM-4GBC*4*8 | CompactFlash card, capacity: 4 GB | |
QD81MEM-8GBC*4*8 | CompactFlash card, capacity: 8 GB | |
Memory card adapter | Q2MEM-ADP | Adapter for Q2MEM memory card's standard PCMCIA slot |
SRAM card battery | Q2MEM-BAT | Replacement battery for Q2MEM-1MBS and Q2MEM-2MBS |
Q3MEM-BAT | Replacement battery for Q3MEM-4MBS and Q3MEM-8MBS | |
Connection cable | QC30R2 | RS-232 cable for connecting PC and CPU, 3 m (between mini-DIN6P and Dsub9P) |
Cable disconnection prevention holder | Q6HLD-R2 | Holder for preventing RS-232 cable (Programmable Controller CPU connection) disconnection |
*1: For use with QnUDVCPU.
*2: For use with Q24DHCCPU-V, Q24DHCCPU-VG.
*3: For use with Q24DHCCPU-LS.
*4: Mitsubishi Electric shall not guarantee the operation of any non-Mitsubishi Electric products.
*5: For use with the Universal model QCPUs (except QnUDV), High Performance model QCPUs, process CPUs, and redundant CPUs that are equipped with the memory card interface.
*6: For use with the Universal model QCPUs (except QnUDV) that are equipped with the memory card interface.
*7: For use with Q06CCPU-V.
*8: For use with Q12DCCPU-V.
Base unit
Main base | Q33B | 3 slots, 1 power supply module required, for Q Series modules |
Q35B | 5 slots, 1 power supply module required, for Q Series modules | |
Q38B | 8 slots, 1 power supply module required, for Q Series modules | |
Q312B | 12 slots, 1 power supply module required, for Q Series modules | |
Multiple CPU high speed main base | Q35DB | 5 slots, power supply module required, for Q Series modules |
Q38DB | 8 slots, 1 power supply module required, for Q Series modules | |
Q312DB | 12 slots, 1 power supply module required, for Q Series modules | |
Slim type main base | Q32SB | 2 slots, 1 slim type power supply module required, for Q Series modules |
Q33SB | 3 slots, 1 slim type power supply module required, for Q Series modules | |
Q35SB | 5 slots, 1 slim type power supply module required, for Q Series modules | |
Redundant power main base | Q38RB | 8 slots, 2 redundant power supply modules required, for Q Series modules |
Extension base | Q63B | 3 slots, 1 power supply module required, for Q Series modules |
Q65B | 5 slots, 1 power supply module required, for Q Series modules | |
Q68B | 8 slots, 1 power supply module required, for Q Series modules | |
Q612B | 12 slots, 1 power supply module required, for Q Series modules | |
Q52B | 2 slots, power supply module not required, for Q Series modules | |
Q55B | 5 slots, power supply module not required, for Q Series modules | |
Redundant power extension base | Q68RB | 8 slots, 2 redundant power supply modules required, for Q Series modules |
Redundant type extension base | Q65WRB*1 | 5 slots, 2 redundant power supply modules required, for Q Series modules |
Extension cable | QC05B | 0.45 m cable for connecting extension base unit |
QC06B | 0.6 m cable for connecting extension base unit | |
QC12B | 1.2 m cable for connecting extension base unit | |
QC30B | 3 m cable for connecting extension base unit | |
QC50B | 5 m cable for connecting extension base unit | |
QC100B | 10 m cable for connecting extension base unit | |
DIN rail mounting adapter | Q6DIN1 | DIN rail mounting adapter for Q38B, Q312B, Q68B, Q612B, Q38RB, Q68RB, Q65WRB, Q38DB, and Q312DB |
Q6DIN2 | DIN rail mounting adapter for Q35B, Q65B, Q00JCPU, and Q00UJCPU | |
Q6DIN3 | DIN rail mounting adapter for Q32SB, Q33SB, Q35SB, Q33B, Q52B, Q55B, and Q63B | |
Q6DIN1A | DIN rail mounting adapter (with vibration-proofing bracket set) for Q3?/span>B, Q5?/span>B, Q6?/span>B, Q38RB, Q68RB, and Q65WRB | |
Blank cover | QG60 | Blank cover for I/O slot |
*1: Only compatible with redundant CPU system.
Power supply module
Power supply | Q61P | Input voltage: 100?40 V AC, output voltage: 5 V DC, output current: 6 A |
Q62P | Input voltage: 100?40 V AC, output voltage: 5/24 V DC, output current: 3/0.6 A | |
Q63P | Input voltage: 24 V DC, output voltage: 5 V DC, output current: 6 A | |
Q64PN | Input voltage: 100?40 V AC, output voltage: 5 V DC, output current: 8.5 A | |
Power supply with life detection | Q61P-D | Input voltage: 100?40 V AC, output voltage: 5 V DC, output current: 6 A |
Slim type power supply | Q61SP | Input voltage: 100?40 V AC, output voltage: 5 V DC, output current: 2 A |
Redundant power supply | Q63RP | Input voltage: 24 V DC, output voltage: 5 V DC, output current: 8.5 A |
Q64RPN | Input voltage: 100?40 V AC, output voltage: 5 V DC, output current: 8.5 A |
Input | AC | QX10 | 16 points, 100?20 V AC, response time: 20 ms, 16 points/common, 18-point terminal block |
QX10-TS | 16 points, 100?20 V AC, response time: 20 ms, 16 points/common, 18-point spring clamp terminal block | ||
QX28 | 8 points, 100?40 V AC, response time: 20 ms, 8 points/common, 18-point terminal block | ||
DC (Positive common)*1 | QX40 | 16 points, 24 V DC, response time: 1/5/10/20/70 ms, 16 points/common, positive common, 18-point terminal block | |
QX40-TS | 16 points, 24 V DC, response time: 1/5/10/20/70 ms, 16 points/common, positive common, 18-point spring clamp terminal block | ||
QX40-S1 | 16 points, 24 V DC, response time: 0.1/0.2/0.4/0.6/1 ms, 16 points/common, positive common, 18-point terminal block | ||
QX40H | 16 points, 24 V DC, response time: 0/0.1/0.2/0.4/0.6/1 ms, 8 points/common, positive common, 18-point terminal block | ||
QX41*2 *3 | 32 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive common, 40-pin connector | ||
QX41-S1*2 | 32 points, 24 V DC, response time: 0.1/0.2/0.4/0.6/1 ms, 32 points/common, positive common, 40-pin connector | ||
QX41-S2*2 *3 | 32 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive common, 40-pin connector | ||
QX42*2 | 64 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive common, 40-pin connector | ||
QX42-S1*2 | 64 points, 24 V DC, response time: 0.1/0.2/0.4/0.6/1 ms, 32 points/common, positive common, 40-pin connector | ||
AC/DC | QX50 | 16 points, 48 V AC/DC, response time: 20 ms, 16 points/common, positive/negative common, 18-point terminal block | |
DC sensor | QX70 | 16 points, 5/12 V DC, response time: 1/5/10/20/70 ms, 16 points/common, positive/negative common, 18-point terminal block | |
QX70H | 16 points, 5 V DC, response time: 0/0.1/0.2/0.4/0.6/1 ms, 8 points/common, positive common, 18-point terminal block | ||
QX71*2 | 32 points, 5/12 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive/negative common, 40-pin connector | ||
QX72*2 | 64 points, 5/12 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive/negative common, 40-pin connector | ||
DC (Negative common) *1 | QX80 | 16 points, 24 V DC, response time: 1/5/10/20/70 ms, 16 points/common, negative common, 18-point terminal block | |
QX80-TS | 16 points, 24 V DC, response time: 1/5/10/20/70 ms, 16 points/common, negative common, 18-point spring clamp terminal block | ||
QX80H | 16 points, 24 V DC, response time: 0/0.1/0.2/0.4/0.6/1 ms, 8 points/common, negative common, 18-point terminal block | ||
QX81*3 *4 | 32 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, negative common, 37-pin D-sub connector | ||
QX81-S2*3 *4 | 32 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, negative common, 37-pin D-sub connector | ||
QX82 *2 | 64 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, negative common, 40-pin connector | ||
QX82-S1*2 | 64 points, 24 V DC, response time: 0.1/0.2/0.4/0.6/1 ms, 32 points/common, negative common, 40-pin connector | ||
QX90H | 16 points, 5 V DC, response time: 0/0.1/0.2/0.4/0.6/1 ms, 8 points/common, negative common, 18-point terminal block | ||
Output | Relay | QY10 | 16 points, 24 V DC/240 V AC, 2 A/point, 8 A/common, response time: 12 ms, 16 points/common, 18-point terminal block |
QY10-TS | 16 points, 24 V DC/240 V AC, 2 A/point, 8 A/common, response time: 12 ms, 16 points/common, 18-point spring clamp terminal block | ||
QY18A | 8 points, 24 V DC/240 V AC, 2 A/point, response time: 12 ms, 18-point terminal block, all points independent | ||
Triac | QY22 | 16 points, 100?40 V AC, 0.6 A/point, 4.8 A/common, response time: 1 ms + 0.5 cycle, 16 points/common, 18-point terminal block, with surge suppression | |
Transistor (Sink) | QY40P | 16 points, 12?4 V DC, 0.1 A/point, 1.6 A/common, response time: 1 ms, 16 points/common, sink type, 18-point terminal block, overload protection function, overheat protection function, surge suppression | |
QY40P-TS | 16 points, 12?4 V DC, 0.1 A/point, 1.6 A/common, response time: 1 ms, 16 points/common, sink type, 18-point spring clamp terminal block, overload protection function, overheat protection function, surge suppression | ||
QY41H | 32 points, 5?4 V DC, 0.2 A/point, 2 A/common, response time: 2 us, 32 points/common, sink type, 40-pin connector, with surge suppression | ||
QY41P*2 | 32 points, 12?4 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type, 40-pin connector, overload protection function, overheat protection function, surge suppression | ||
QY42P*2 | 64 points, 12?4 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type, 40-pin connector, overload protection function, overheat protection function, surge suppression | ||
QY50 | 16 points, 12?4 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, sink type, 18-point terminal block, with surge suppression and fuse | ||
Transistor (Independent) | QY68A | 8 points, 5?4 V DC, 2 A/point, 8 A/module, response time: 10 ms, sink/source type, 18-point terminal block, with surge suppression, all points independent | |
TTL CMOS | QY70 | 16 points, 5?2 V DC, 16 mA/point, 256 mA/common, response time: 0.5 ms, 16 points/common, sink type, 18-point terminal block, with fuse | |
QY71*2 | 32 points, 5?2 V DC, 16 mA/point, 512 mA/common, response time: 0.5 ms, 32 points/common, sink type, 40-pin connector, with fuse | ||
Transistor (Source) | QY80 | 16 points, 12?4 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, source type, 18-point terminal block, with surge suppression and fuse | |
QY80-TS | 16 points, 12?4 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, source type, 18-point spring clamp terminal block, with surge suppression and fuse | ||
QY81P*4 | 32 points, 12?4 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, source type, 37-pin D-sub connector, overload protection function, overheat protection function, surge suppression | ||
QY82P*2 | 64 points, 12?4 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, source type, 40-pin connector, overload protection function, overheat protection function, surge suppression | ||
I/O | DC input/ transistor output | QH42P*2 *5 | Input: 32 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive common, output: 32 points, 12?4 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type, 40-pin connector, overload protection function, overheat protection function, surge suppression |
QX48Y57 | Input: 8 points, 24 V DC, response time: 1/5/10/20/70 ms, 8 points/common, positive common, output: 7 points, 12?4 V DC, 0.5 A/point, 2 A/common, response time: 1 ms, 7 points/common, sink type, 18-point terminal block, with surge suppression and fuse | ||
QX41Y41P*2 *5 | Input: 32 points, 24 V DC, response time: 1/5/10/20/70 ms, 32 points/common, positive common, output: 32 points, 12?4 V DC, 0.1 A/point, 2 A/common, response time: 1 ms, 32 points/common, sink type, 40-pin connector, overload protection function, overheat protection function, surge suppression | ||
Interrupt module | QI60 | 16 points, 24 V DC, response time: 0.1/0.2/0.4/0.6/1 ms, 16 points/common, 18-point terminal block | |
*1: "Positive common" indicates that the positive lead of a DC power supply must be connected to the common terminal.
Accordingly, "Negative common" indicates that the negative lead must be connected to the common terminal.
*2: Connector is not provided. Separately order one of the following: A6CON1/A6CON2/A6CON3/A6CON4.
*3: The rated input currents are different. [QX41: approx. 4 mA, QX41-S2: approx. 6 mA, QX81: approx. 4 mA, QX81-S2: approx. 6 mA]
83 *4: Connector is not provided. Separately order one of the following: A6CON1E/A6CON2E/A6CON3E.
*5: The number of occupied input/output points is different. [QH42P: 32 points; QX41Y41P: 64 points (first 32 points: input/second 32 points: output)]
I/O module
Connector | A6CON1 | 32-point connector soldering type (40-pin connector) | |
A6CON2 | 32-point connector crimp-contact type (40-pin connector) | ||
A6CON3 | 32-point connector pressure-displacement (flat cable) type (40-pin connector) | ||
A6CON4 | 32-point connector soldering type (40-pin connector, cable connectable in bidirection) | ||
A6CON1E | 32-point connector soldering type (37-pin D-sub connector) | ||
A6CON2E | 32-point connector crimp-contact type (37-pin D-sub connector) | ||
A6CON3E | 32-point connector pressure-displacement (flat cable) type (37-pin D-sub connector) | ||
Spring clamp terminal block | Q6TE-18SN | For 16-point I/O modules, 0.3?.5 mm² (22?6 AWG) | |
Terminal block adapter | Q6TA32 | For 32-point I/O modules, 0.5 mm² (20 AWG) | |
Q6TA32-TOL | Q6TA32 dedicated tool | ||
Connector/terminal block conversion module | A6TBXY36 | For positive common input modules and sink output modules (standard type) | |
A6TBXY54 | For positive common input modules and sink output modules (2-wire type) | ||
A6TBX70 | For positive common input modules (3-wire type) | ||
A6TBX36-E | For negative common input modules (standard type) | ||
A6TBX54-E | For negative common input modules (2-wire type) | ||
A6TBX70-E | For negative common input modules (3-wire type) | ||
A6TBY36-E | For source output modules (standard type) | ||
A6TBY54-E | For source output modules (2-wire type) | ||
Cable | AC05TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 0.5 m | |
AC10TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 1 m | ||
AC20TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 2 m | ||
AC30TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 3 m | ||
AC50TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 5 m | ||
AC80TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 8 m *Common current 0.5 A or lower | ||
AC100TB | For A6TBXY36, A6TBXY54, and A6TBX70 (positive common/sink type), 10 m *Common current 0.5 A or lower | ||
AC05TB-E | For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type), 0.5 m | ||
AC10TB-E | For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type), 1 m | ||
AC20TB-E | For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type), 2 m | ||
AC30TB-E | For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type), 3 m | ||
AC50TB-E | For A6TBX36-E, A6TBY36-E, A6TBX54-E, A6TBY54-E, and A6TBX70-E (negative common/source type), 5 m | ||
Relay terminal module | A6TE2-16SRN | For 40-pin connector 24 V DC transistor output modules (sink type) | |
Cable | AC06TE | For A6TE2-16SRN, 0.6 m | |
AC10TE | For A6TE2-16SRN, 1 m | ||
AC30TE | For A6TE2-16SRN, 3 m | ||
AC50TE | For A6TE2-16SRN, 5 m | ||
AC100TE | For A6TE2-16SRN, 10 m | ||
Analog I/O module
Analog input | Voltage input | Q68ADV | 8 channels, input: -10?0 V DC, output (resolution): 0?000, -4000?000, 0?2000, -12000?2000, 0?6000, -16000?6000, conversion speed: 80 µs/channel, 18-point terminal block |
Current input | Q62AD-DGH | 2 channels; input, 4?0 mA DC, output (resolution): 0?2000, 0?4000, conversion speed: 10 ms/2 channels, 18-point terminal block, channel isolated, supplies power to 2-wire transmitter | |
Q66AD-DG*1 | 6 channels, input: 4?0 mA DC (when 2-wire transmitter is connected), 0?0 mA DC, output (resolution): 0?000, 0?2000, conversion speed: 10 ms/channel, 40-pin connector, channel isolated, supplies power to 2-wire transmitter | ||
Q68ADI | 8 channels, input: 0?0 mA DC, output (resolution): 0?000, -4000?000, 0?2000, -12000?2000, 0?6000, -16000?6000 conversion speed: 80 µs/channel, 18-point terminal block | ||
Voltage/current input | Q64AD | 4 channels; input -10?0 V DC, 0?0 mA DC, output (resolution): 0?000, -4000?000, 0?2000, -12000?2000, 0?6000, -16000?6000, conversion speed: 80 µs/channel, 18-point terminal block | |
Q64ADH | 4 channels; input -10?0 V DC, 0?0 mA DC, output (resolution): 0?0000, -20000?0000, -5000?2500, conversion speed: 20 µs/channel, 18-point terminal block | ||
Q64AD-GH | 4 channels, input: -10?0 V DC, 0?0 mA DC, output (resolution): 0?2000, -32000?2000, 0?4000, -64000?4000, conversion speed: 10 ms/4 channels, 18-point terminal block, channel isolated | ||
Q68AD-G*1 | 8 channels, input: -10?0 V DC, 0?0 mA DC, output (resolution): 0?000, -4000?000, 0?2000, -12000?2000, 0?6000, -16000?6000, conversion speed: 10 ms/channel, 40-pin connector, channel isolated |
*1: A connector is not provided. The A6CON4 connector must be ordered separately.
Analog output | Voltage output | Q68DAVN | 8 channels, input (resolution): 0?000, -4000?000, 0?2000, -12000?2000, -16000?6000, output: -10?0 V DC, conversion speed: 80 µs/channel, 18-point terminal block |
Current output | Q68DAIN | 8 channels, input (resolution): 0?000, -4000?000, 0?2000, -12000?2000; output: 0?0 mA DC, conversion speed: 80 µs/channel, 18-point terminal block | |
Voltage/current output | Q64DAH | 4 channels, input (resolution): 0?0000, -20000?0000 output: -10?0 V DC, 0?0 mA DC, conversion speed: 20 µs/channel, 18-point terminal block | |
Q62DAN | 2 channels, input (resolution): 0?000, -4000?000, 0?2000, -12000?2000, -16000?6000, output: -10?0 V DC, 0?0 mA DC, conversion speed: 80 µs/channel, 18-point terminal block | ||
Q62DA-FG | 2 channels, input (resolution): 0?2000, -12000?2000, -16000?6000, output: -12?2 V DC, 0?2 mA DC, conversion speed: 10 ms/2 channels, 18-point terminal block, channel isolated | ||
Q64DAN | 4 channels, input (resolution): 0?000, -4000?000, 0?2000, -12000?2000, -16000?6000, output: -10?0 V DC, 0?0 mA DC, conversion speed: 80 µs/channel, 18-point terminal block | ||
Q66DA-G*1 | 6 channels, input (resolution): 0?000, -4000?000, 0?2000, -12000?2000, -16000?6000, output: -12?2 V DC, 0?2 mA DC, conversion speed: 6 ms/channel, 40-pin connector, channel isolated | ||
Analog input/ output | Voltage and current input/ output | Q64AD2DA | Input: 4 channels, input: -10?0 V DC, 0?0 mA DC » output (resolution): 0?000, -4000?000, 0?2000, 0?6000, -16000?6000 » conversion speed: 500 µs/channel output: 2 channels input (resolution): 0?000, -4000?000, 0?2000, -16000?6000 » output: -10?0 V DC, 0?0 mA DC » conversion speed: 500 µs/channel 18-point terminal block |
Load cell input | Q61LD | 1 channel, input (load cell output): 0.0?.3 mV/V, output (resolution): 0?0000, conversion speed: 10 ms, 18-point terminal block | |
CT input module | Q68CT | 8 channels, input: CT 0? A AC, 0?0 A AC, 0?00 A AC, 0?00 A AC, 0?00 A AC, 0?00 A AC, output: 0?0000, 18-point terminal block | |
Temperature input | Thermocouple | Q64TD | 4 channels, thermocouple (B, R, S, K, E, J, T, N), disconnection detection function, conversion speed: 40 ms/channel, channel isolated, 18-point terminal block |
Q64TDV-GH | 4 channels, thermocouple (B, R, S, K, E, J, T, N), disconnection detection function, conversion speed: sampling cycle × 3, sampling cycle: 20 ms/channel, channel isolated, 18-point terminal block | ||
Q68TD-G-H01*1*2 | 8 channels, thermocouple (B, R, S, K, E, J, T, N), disconnection detection function, conversion speed: 320 ms/8 channels, channel isolated, 40-pin connector | ||
Q68TD-G-H02*1 | 8 channels, thermocouple (B, R, S, K, E, J, T, N), disconnection detection function, conversion speed: 640 ms/8 channels, channel isolated, 40-pin connector | ||
RTD | Q64RD | 4 channels, platinum RTD (Pt100, JPt100), disconnection detection function, conversion speed: 40 ms/channel, 18-point terminal block | |
Q64RD-G | 4 channels, platinum RTD (Pt100, JPt100), nickel RTD (Ni100), disconnection detection function, conversion speed: 40 ms/channel, channel isolated, 18-point terminal block | ||
Q68RD3-G*1 | 8 channels, platinum RTD (Pt100, JPt100), nickel RTD (Ni100), disconnection detection function, conversion speed: 320 ms/8 channels, channel isolated, 40-pin connector | ||
Temperature control | Thermocouple | Q64TCTTN | 4 channels, thermocouple (K, J, T, B, S, E, R, N, U, L, PL?/span>, W5Re/W26Re), heating control/cooling control/heating-cooling control, sampling cycle: 500 ms/4 channels, channel isolated, 18-point terminal block |
Q64TCTTBWN | 4 channels, thermocouple (K, J, T, B, S, E, R, N, U, L, PL?/span>, W5Re/W26Re), heating control/cooling control/heating-cooling control, heater disconnection detection function, sampling cycle: 500 ms/4 channels, channel isolated, two 18-point terminal blocks | ||
RTD | Q64TCRTN | 4 channels, platinum RTD (Pt100, JPt100), heating control/cooling control/heating-cooling control, sampling cycle: 500 ms/4 channels, channel isolated, 18-point terminal block | |
Q64TCRTBWN | 4 channels, platinum RTD (Pt100, JPt100), heating control/cooling control/heating-cooling control, heater disconnection detection function, sampling cycle: 500 ms/4 channels, channel isolated, two 18-point terminal blocks | ||
Loop control | Q62HLC | 2 channels, input: thermocouple/micro voltage/voltage/current, conversion speed (input): 25 ms/2 channels, sampling cycle: 25 ms/2 channels, output: 4?0 mA DC, conversion speed (output): 25 ms/2 channels, 18-point terminal block, with 5 PID control modes | |
*1: A connector is not provided. The A6CON4 connector must be ordered separately.
*2: Depending on the combination of power source module and base unit, the installable slot position may be limited.
Control network module
CC-Link IE Control Network | QJ71GP21-SX | Multi-mode fiber optic cable, dual loop, control network (control/normal station) | |
QJ71GP21S-SX | Multi-mode fiber optic cable, dual loop, control network (control/normal station), with external power supply function | ||
MELSECNET/H | Optical loop (SI) | QJ71LP21-25 | SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, control network (control/normal station) or remote I/O network (remote mater station) |
QJ71LP21S-25 | SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, control network (control/normal station) or remote I/O network (remote mater station), with external power supply function | ||
QJ72LP25-25 | SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, remote I/O network (remote I/O station) | ||
Optical loop (GI) | QJ71LP21G | GI-50/125 fiber optic cable, dual loop, control network (control/normal station) or remote I/O network (remote master station) | |
QJ72LP25G | GI-50/125 fiber optic cable, dual loop, remote I/O network (remote I/O station) | ||
Coaxial bus | QJ71BR11 | 3C-2V/5C-2V coaxial cable, single bus, control network (control/normal station) or remote I/O network (remote master station) | |
QJ72BR15 | 3C-2V/5C-2V coaxial cable, single bus, remote I/O network (remote I/O station) | ||
Twist bus | QJ71NT11B | Twisted pair cable, single bus, control network (control/normal station) | |
CC-Link IE Field Network | QJ71GF11-T2 | Master/local station, CC-Link IE Field Network compatible | |
CC-Link | QJ61BT11N | Master/local station, CC-Link Ver. 2 compatible | |
CC-Link/LT | QJ61CL12 | Master station | |
FL-net (OPCN-2) | Ver. 2.00 | QJ71FL71-T-F01 | 10BASE-T, 100BASE-TX |
QJ71FL71-B2-F01 | 10BASE2 | ||
QJ71FL71-B5-F01 | 10BASE5 | ||
Ver. 1.00 | QJ71FL71-T | 10BASE-T | |
QJ71FL71-B2 | 10BASE2 | ||
QJ71FL71-B5 | 10BASE5 | ||
MODBUS® | QJ71MB91 | MODBUS® RTU/ASCII, RS-232, RS-422/485 configurable as master or slave | |
QJ71MT91 | MODBUS®/TCP 10BASE-T/100BASE-TX configurable as master or slave | ||
AS-i | QJ71AS92 | Master station, AS-Interface Specification Version 2.11 compatible | |
Digital link sensor
AnyWireASLINK | QJ51AW12AL DB | AnyWireASLINK master module |
Compatible module for each protocol
Compatible protocol | Compatible modules | Model | Outline |
SLMP (MC protocol) | High-speed Universal model (Built-in Ethernet) | QnUDVCPU | SLMP server function (only MC protocol QnA compatible 3E frame) SLMP client function (using predefined protocol support function) |
Universal model QCPU (Built-in Ethernet) | QnUDE(H)CPU | ||
Ethernet interface module | QJ71E71-100 | SLMP server function (including MC protocol) SLMP client function (using predefined protocol support function) | |
BACnet?/span> | High-speed Universal model (Built-in Ethernet) | QnUDVCPU | Compatible BACnetTM object: Analog Input (AI), Binary Input (BI), Binary Output (BO), Accumulator (AC) (using predefined protocol support function) |
Ethernet interface module | QJ71E71-100 | ||
BACnet?interface module (3rd party products) | BAQ08V | Compatible BACnetTM object: Analog Input (AI), Analog Output (AO), Analog Value (AV), Binary Input (BI), Binary Output (BO), Binary Value (BV), Multi-state Input (MI), Multi-state Output (MO), Multi-state Value (MV), Accumulator (AC), Calendar (CA), EventEnrollment (EE), Group Object (GR), Notification Class (NC), Schedule (SC), TrendLog (TL), Device (DV), Measurement object (measure)*1, Power demand monitoring (monitor power)*2, Power demand control (control power)*2, Generator load control (generator)*2 | |
MODBUS®/TCP | High-speed Universal model (Built-in Ethernet) | QnUDVCPU | MODBUS®/TCP communication master function (using predefined protocol support function) |
Ethernet interface module | QJ71E71-100 | ||
MODBUS®/TCP interface module | QJ71MT91 | MODBUS®/TCP communication master function/slave function | |
MODBUS® | Serial communication module | QJ71C24N (-R2/R4) | MODBUS®RTU communication master function (using predefined protocol support function) |
MODBUS® interface module | QJ71MB91 | MODBUS® RTU/ASCII communication master function/slave function |
*1: ANSI/ASHRAE 2004 and IEIEJ 2006 standards are not supported.
*2: ANSI/ASHRAE 2004 standard is not supported.
Q Large base | Main base | Q35BL*1 | 5 slots. Power supply module installation required. For Q Series large input/output module installation |
Q38BL*1 | 8 slots. Power supply module installation required. For Q Series large input/output module installation | ||
Extension base | Q65BL*1 | 5 slots. Power supply module installation required. For Q Series large input/output module installation | |
Q68BL*1 | 8 slots. Power supply module installation required. For Q Series large input/output module installation | ||
Q55BL*1 | 5 slots. Power supply module installation not required. For Q Series large input/output module installation | ||
Large blank cover | QG69L*1 | For gap adjustment when a previous Q Series module is installed on the Q large base | |
AnS-sized version Q Large base | Main base | Q35BLS | 5 slots. Q Series module installation Attaches to board surface |
Q38BLS | 8 slots. Q Series module installation Attaches to board surface | ||
Q35BLS-D | 5 slots. Q Series module installation Attaches to DIN rail | ||
Q38BLS-D | 8 slots. Q Series module installation Attaches to DIN rail | ||
Extension base | Q65BLS | 5 slots. Q Series module installation Attaches to board surface | |
Q68BLS | 8 slots. Q Series module installation Attaches to board surface | ||
Q65BLS-D | 5 slots. Q Series module installation Attaches to DIN rail | ||
Q68BLS-D | 8 slots. Q Series module installation Attaches to DIN rail | ||
Q55BLS | 5 slots. Q Series module installation Attaches to board surface, power supply module not required | ||
Q55BLS-D | 5 slots. Q Series module installation Attaches to DIN rail, power supply module not required | ||
Large blank cover | QG69LS | Use to adjust the gap when an existing Q Series unit is installed on the large base unit of the AnS-sized Q. | |
Q Large I/O | Input | QX11L*1 | For replacement of A-Series large type module "AX11". 32 points, 100?20 V AC, response time: 25 ms, 32 points/common, 38-point terminal block |
QX21L*1 | For replacement of A-Series large type module "AX21". 32 points, 200?40 V AC, response time: 25 ms, 32 points/common, 38-point terminal block | ||
Output | QY11AL*1 | For replacement of A-Series large type module "AY10A, AY11A". 16 points, contact, 24 V DC/240 V AC, 2 A/point; 16 A/all points, all-point independent contacts, response time: 12 ms, 38-point terminal block | |
QY13L*1 | For replacement of A-Series large type module "AY13". 32 points, contact, 24 V DC/240 V AC, 2 A/point; 5 A/common, 8 points/common, response time: 12 ms, 38-point terminal block | ||
QY23L*1 | For replacement of A-Series large type module "AY23". 32 points, triac, 100?40 V AC; 0.6 A/point, 2.4 A/common, 8 points/common, response time: 1 ms + 0.5 cycle, 38-point terminal block | ||
QY51PL | For replacement of A-Series large type module "AY41, AY41P, AY51, AY51-S1". 32 points, transistor (sink), 12/24 V DC; 0.5 A/point; 4 A/common, 16 points/common, response time: 1 ms, 38-point terminal block | ||
High-speed counter | QD62-H01*2 | For replacement of A-Series large type module "AD61". 2 channels, 50 kpps, count input signal: 5/12/24 V DC, external input: 5/12/24 V DC, coincidence output: transistor (sync), 12/24 V DC, 0.5 A/point; 2 A/common | |
QD62-H02*2 | For replacement of A-Series large type module "AD61-S1". 2 channels, 10 kpps, count input signal: 5/12/24 V DC, external input: 5/12/24 V DC, coincidence output: transistor (sync), 12/24 V DC, 0.5 A/point; 2 A/common | ||
Positioning | QD73A1 | For replacement of “A1SD70? 1 axis. Number of positioning data items: 1 data/axis, analog output | |
Extension base | AnS Series | QA1S51B*3 | 1 slot. Does not require installation of AnS Series power supply module. For AnS Series module installation |
QA1S65B*3 | 5 slots. Requires AnS Series power supply module installation. For AnS Series module installation | ||
QA1S68B*3 | 8 slots. Requires AnS Series power supply module installation. For AnS Series module installation | ||
A Series | QA65B*3 | 5 slots. Requires A Series power supply module installation. For A Series module installation | |
QA68B*3 | 8 slots. Requires A Series power supply module installation. For A Series module installation | ||
Q-AnS base unit conversion adapter | QA1S6ADP | Conversion adapter to connect an AnS/QnAS Series extension base unit to the Q Series system | |
QA1S6ADP-S1 | Conversion adapter to connect an AnS/QnAS Series extension base unit to the Q Series system (for up to 3 extension base units) | ||
QA base unit conversion adapter | QA6ADP | Conversion adapter to connect an A/QnA Series extension base unit to the Q Series system | |
For MELSECNET (?/span>) local station | A1SJ71AP23Q*4 | Optic cable, duplex loop, MELSECNET (?/span>) local station | |
A1SJ71AR23Q*4 | 3C-2V/5C-2V coaxial cable, duplex loop, MELSECNET (?/span>) local station | ||
For MELSECNET/B local station | A1SJ71AT23BQ*4 | Twisted pair cable, single bus, MELSECNET/B local station | |
*1: Only supported only by High Performance QCPU and Universal QCPU (Excluding Q00UJCPU).
*2: A connector is not provided. Please order one of the following separately: A6CON1/A6CON2/A6CON3/A6CON4
*3: Only supported only by High Performance model QCPU.
*4: Only supported by high performance model QCPU and Universal model QCPU (first five digits of serial No. 13102 or higher).
Model Outline
Network interface board
CC-Link IE Control Network | Q80BD-J71GP21-SX | PCI bus/PCI-X bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, control network (control/normal station) | |
Q81BD-J71GP21-SX | PCI Express bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, control network (control/normal station) | ||
Q80BD-J71GP21S-SX | PCI bus/PCI-X bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, control network (control/normal station), with external power supply function | ||
Q81BD-J71GP21S-SX | PCI Express bus, Japanese/English OS compatible, multi-mode fiber optic cable, dual loop, control network (control/normal station), with external power supply function | ||
CC-Link IE Field Network | Q81BD-J71GF11-T2*1 | PCI Express compatible, Ethernet connections in line, star, or line and star mixed, configurable as master or local station. | |
MELSECNET/H(10) | Optical loop (SI) | Q81BD-J71LP21-25 | PCI Express bus, Japanese/English OS compatible, SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, control network (control/normal station) |
Q80BD-J71LP21-25 | PCI bus, Japanese/English OS compatible, SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, control network (control/normal station) | ||
Q80BD-J71LP21S-25 | PCI bus, Japanese/English OS compatible, SI/QSI/H-PCF/broadband H-PCF fiber optic cable, dual loop, control network (control/normal station), with external power supply function | ||
Optical loop (GI) | Q80BD-J71LP21G | PCI bus, Japanese/English OS compatible, GI-50/125 fiber optic cable, dual loop, control network (control/normal station) | |
Coaxial bus | Q80BD-J71BR11 | PCI bus, Japanese/English OS compatible, 3C-2V/5C-2V coaxial cable, single bus, control network (control/normal station) | |
CC-Link | Q81BD-J61BT11 | PCI Express bus, Japanese/English OS compatible, master/local interface board, CC-Link Ver. 2 compatible | |
Q80BD-J61BT11N | PCI bus, Japanese/English OS compatible, master/local interface board, CC-Link Ver. 2 compatible | ||
*1: Does not support being used as the master station in a ring network.
Ethernet related products
Wireless LAN Adapter | U.S.A. | NZ2WL-US*2*3 DB | Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards |
Europe | NZ2WL-EU*2*3 DB | Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards | |
China | NZ2WL-CN*2*3 DB | Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards | |
Korea | NZ2WL-KR*2*3 DB | Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards | |
Taiwan | NZ2WL-TW*2*3 DB | Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards | |
Industrial switching HUB | NZ2EHG-T8 DB | 10 Mbps/100 Mbps/1 Gbps AUTO-MDIX, DIN rail supported, 8 ports | |
NZ2EHF-T8 DB | 10 Mbps/100 Mbps AUTO-MDIX, DIN rail supported, 8 ports | ||
CC-Link IE Field Network Ethernet Adapter | NZ2GF-ETB | 100 Mbps/1 Gbps compatible station for expanding CC-Link IE Field Networks | |
*2: Each product is usable only in the respective country.
*3: Both access points and stations are supported, and can be switched with the settings.
»For details on the software versions compatible with each module, refer to the manual for each product.
Please contact your local Mitsubishi Electric sales office or representative for the latest information about MELSOFT software versions and compatible operating systems.
