MITSUBISHI GT21-04PSGC-UC Instructions PDF

Cable length: 2.5m.
For motion controller CPU (A series, the main base system) and the connection between GOT.
Applicable models: GT16, GT15, GT11. Protective film for 4 GT21-04PSGC-UC PDF. 5 inch screen.
Scrub, 5.
Applicable model: GT1030. Support for 5.7 inch.
Applicable models: GT16, GT15. Cable length: 20.6m.
Long distance connection between CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller GT21-04PSGC-UC
Long distance connection between A7GT-CNB and GOT.
Applicable models: GT16, GT15, GT11. 15 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5 GT21-04PSGC-UC PDF.
Applicable model: GT27. A seriess of high performance models that are widely used in network or single machine work environments GT21-04PSGC-UC Manual .
Screen size: 5.7 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black GT21-04PSGC-UC PDF.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI Instructions MITSUBISHI Instructions.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly MITSUBISHI Instructions GT21-04PSGC-UC Instructions. For the QCPU (Q mode) / transport controller CPU (Q Series) bus connection (2 channel) unit standard model GT21-04PSGC-UC Manual .
Applicable models: GT15, GT16, GT27, GT25.