MITSUBISHI Q06UDHCPU Strctured Programming Manual (Fundamentals) PDF

Output: 6 channels.
Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; -16000~16000.
Output: DC-12V~12V; 0~22mA.
Conversion speed: 6ms/ channel Q06UDHCPU PDF.
40 pin connector.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark Q06UDHCPU
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output Q06UDHCPU PDF.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module Q06UDHCPU PDF.
No external isoolation amplifier required Q06UDHCPU Manual.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module. Control axis: maximum 8 axes.
Greater flexibility.
PLC control and motion control using independent CPU, optimize the system configuration.
More than 4 CPU modules can be freely selected in multi CPU system MITSUBISHI Strctured Programming Manual.
MITSUBISHI SSCNET control function.
By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.
The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified MITSUBISHI Strctured Programming Manual.
Each 1 CPU can control up to 32 axes at the same time.
Can control the small capacity from 10W to 55KW large capacity servo motor.
Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring MITSUBISHI Strctured Programming Manual. Control axis: maximum 32 axes.
Compact size and space saving.
Using the same hardware structuree and MELSEC-Q series PLC, to achieve the same product installation area, the size of the industry Q06UDHCPU Strctured Programming Manual.
Using 12 slot substrate, more space and cost savings.
Can share PLC MELSEC-Q power module, substrate, and I/O module.
The control prrocess can be assigned to each CPU module in the multi CPU system, which is equivalent to the intelligent control system Q06UDHCPU Manual.
In PC (Computer Personal) CPU.