OMRON CS1G-CPU45-EV1 REFERENCE MANUAL (Communications Commands) PDF

For Hand-held Programming Console.
2m.Model: C200H-ID215.
No. of inputs: 32 pts.
Specifications: 24VDC.2 Platinum resistance thermometer inputs -40 to 250 °C and one output -10 to 10V, 4 to 20 mAName: SYSMAC LINK Module CS1G-CPU45-EV1 PDF.
Model: C200HW-SLK23.
Communications method: N: N token bus.
Transmission method: Manchester code, base band.
Transmission path: Bus.
Weight: 400 g max.Name: External Connector CS1G-CPU45-EV1
Model: C500-CE403.
Specifications: Pressure welded terminal; 40p.CPU Bus Cable (Expansion CPU Rack) 0.3 m (L) CV500-CN3118 pts, 1.2 A, 120 VACModel: CPM2C-8EDM. Units with inputs only.
1 MIL connector CS1G-CPU45-EV1 PDF.
Inputs: 8 inputs.
Outputs: ---.
Input type: 24 VDC.
Output type: --.Model: CPM2A-60CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 36 points.
Outputs points: 24 points.80 cm for CP1W/CPM1A Expansion UnitsPower supply voltage: DC100V.
Note: operation with output contacts CS1G-CPU45-EV1 PDF.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program OMRON REFERENCE MANUAL.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components OMRON REFERENCE MANUAL. Unit type: CS1 Special I/O Units.
Product namme: Isolated-type,
Thermocouple Input Units CS1G-CPU45-EV1 Manual.
points Input: 4 inputs.
Signal range selection:
Set separately for each input OMRON REFERENCE MANUAL.
I/O type: B, E, J, K, L, N, R, S,
T, U, WRe5-26, PLII, ±100 mV.
Conversion speed: 20 ms/4 inputs,
10 ms/2 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 26V, 0.08A.
Standards: UC1, N, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CS1G-CPU45-EV1 REFERENCE MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CS1G-CPU45-EV1 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.