OMRON D4JL-2NFA-C7-07 INSTRUCTION sheet PDF

Type: Welding / wire type, with left column.
Driving rod: swing lever type.
Terminal specifications: with wire, under the lead.
Contact specifications: 1c D4JL-2NFA-C7-07 PDF.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used for easy long stroke specifications (OT reference value: 1 D4JL-2NFA-C7-074mm).
Without harmful substances to the environment, the lead type has also been lead-free. Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release D4JL-2NFA-C7-07 PDF.
Contact configuration(door open/closed ddetection switch,
and lock monitor switch contacts): 3NC+3NC D4JL-2NFA-C7-07 Manual.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads D4JL-2NFA-C7-07 PDF.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection OMRON INSTRUCTION sheet. Using terminal, saving wiring and working hours.
Using a press connector to achieve individual wiring.
The terminal can realize the space saving.
The driving rod has 2 mounting directions, and the switch is installed with a large degree of freedom.
And SS ultra small micro switch installation spacing consistent OMRON INSTRUCTION sheet. Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Plastic rod.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mouunting D4JL-2NFA-C7-07 INSTRUCTION sheet.
of up to 6 Switches.
Cable connectors for easy Switch replacement OMRON INSTRUCTION sheet.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
((standard indicator is lit when Switch is not operating) D4JL-2NFA-C7-07 Manual.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)