OMRON E54-CT1 INSTRUCTION Manual PDF

Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 39 (53).
Output configuration: PNP E54-CT1 PDF.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated E54-CT1
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: T-shaped, slot center 10 mm.
Sensing method: L-shaped E54-CT1 PDF.
Connecting method:: Connector(4 poles) E54-CT1 Manual.
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation E54-CT1 PDF.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available OMRON INSTRUCTION Manual.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Size: 45 × 35 mm.
Type: Plug-in.
Control method: ON/OFF operation.
Control output: Relay.
Power supply voltage: 100 to 240 VAC.
Ideal for Simple Built-in Control.
A high switching capacity of 10 A at 250 VAC enables,
direct load switching OMRON INSTRUCTION Manual.
A sensor is provided to enable immediate application.
Sockets with finger protection (PTF14A-E) or without,
finnger protection (PTF14A) can be used E54-CT1 INSTRUCTION Manual.
Simple operation and settings. Even simpler with digital models. E32-TC200F4R type: standard type; soft (new standard),
Specialty: M3 screw (small) with casing,
Shape / detection distance (mm): 1160; 130; 75 (30),
Standard test object
(minimum test object) (mm) 1: 0 OMRON INSTRUCTION Manual E54-CT1 Manual. 5 (0.005),
Fiber element for meeting diversified needs