OMRON Z-15GW2-B datasheet PDF

Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications Z-15GW2-B PDF.
Long-distance model for up to 1,000 mm. Connection method: Pre-wired connector Z-15GW2-B
Cable length: 0.5 m.
Sensing distance: 50 ± 10 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications Z-15GW2-B PDF.
Long-distance model for up to 1,000 mm.Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: linear beam.
Beam diameter: 1.0mm * 30 m.
Resolution: 0.25 M.
Cable length: 0.5m. Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Reverse hinge lever.
Best-selling Basic Switch Boasting Z-15GW2-B PDF.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confiined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome Z-15GW2-B datasheet. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted Z-15GW2-B datasheet.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.