OMRON ZEN-10C2DR-D-V2 Operation Manual PDF

Actuator: General purpose; Roller plunger; AC.
Mounting: Base mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking ZEN-10C2DR-D-V2 PDF.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches ZEN-10C2DR-D-V2 DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection ZEN-10C2DR-D-V2 PDF.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam ZEN-10C2DR-D-V2 PDF.
Beam diameter: 2.2mm * 45 M.
Resolution: 0.6 M.
Cable length: 2m. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Panel mount cross roller plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy OMRON Operation Manual.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available OMRON Operation Manual. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments ZEN-10C2DR-D-V2 Manual.
Stable measurements for any type of workpiece OMRON Operation Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Sensor that can be connected: Thermo-Humidity Sensor Head (ZN-THS1__-S).
Display: LCD 7-segment 5-digit 2-step display,
auxiliary information indicator display.
Measurement interval: 10 s, 20 s, 30 s, 1 min, 2 min,
5 min, 10 min, 20 min, 30 min, 1 h.
Calculation function: Instantaneous value, maximum value,
minimum value, average value.
Operating mode: Normal mode, sleep mode.
Recording mode: Continue, ring.
Alarm signal output: Output to photocoupler (External power supply: 12 to 24 VDC,
Load current: Max. 45 mA) Alarm hold setting is possible.
Internal storage device: Internal memory: Approx. 8,500 data items.
External storage device: SD card (to save measured values and to save/read set, values),Recommended SD card: HMC-SD291 (manufactured by OMRON).
Power supply voltage: DC input: 24 VDC±10%, Battery: 2 AAA batteries.
Battery life: Approx. 1 year∗6 (sleep mode, measurement interval of 10 minnutes, with 2 AAA nickel metal hydride batteries, with SD card not inserted) ZEN-10C2DR-D-V2 Operation Manual.
Operating temperature range: 0 to 60°C.
Operating humidity range: 20 to 85% (no condensation).
Weight (packaged): Approx. 500 g.
Accessories: IInstruction Sheet, Startup Guide CD-ROM∗7,
Alarm output connector∗8, DC cable (straight type) ZEN-10C2DR-D-V2 Manual.
Easy temperature and humidity control with an SD Card.