LK166
Home >> Price >> YASKAWA >> SGMGH-09ACD2D
Brand sort

YASKAWA SGMGH-09ACD2D

Brand: YASKAWA
Country:
Name: Motor for high precision machine tool
Price: 0
YASKAWA SGMGH-09ACD2D
DC power input servo unit type SGDV.
Maximum applicable motor capacity: 30W.
Power supply voltage: DC48V.
Interface: MECHATROLINK- II communication command type (rotary servo motor).
Design sequence: B.
Realize real time communication.
The maximum transmission speed is 10Mbps, the communication cycle of 250 tested s ~ 4ms (depending on the device),
Can carry up to 30 stations of the high speed control SGMGH-09ACD2D Through the high speed of communication, can send and receive all kinds of control information in real time.
Energy saving and high efficiency
A maximum of 30 stations can be connected to the communication lines, can significantly reduce the wiring costs and time SGMGH-09ACD2D.
The command connector of the upper controller only needs 1,
Pulse generator for D/A converter or position instruction without speed / torque command .
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronization phase control.
Because the control mode can be switched on line, the complicated mechanical efficiency can be realized more effectively and smoothly SGMGH-09ACD2D. SGMCS small capacity type of direct drive servo motor.
Rated torque: M \/ 25N.
Servo motor outside diameter size: 230mm.
Serial encoder: 20 bit absolute value type (absolute value of 1 circles) (standard).
Design sequence: the outer diameter of the servo motor is marked as B, C and D.
Flange specification: face C, reverse load side.
Optional specifications: no matching.
Under the condition of no speed reducer, the load is directly driven.
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 6 ~ 600N \/ m, maximum speed: 250 ~ 500r\/min).
By using 20 bit high resolution encoder, the high precision can be carried out.
The use of hollow structure, convenient wiring and piping.
Use example:
Semiconductor manufacturing equipment.
Liquid crystal circuit board manufacturing equipment.
Various inspection and test equipment.
Electronic part packaging machine.
IC information processor.
IC inspection equipment.
A variety of automated machinery.
Robot。
Small capacity ratings and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent maggnet type SGMGH-09ACD2D.
Installationn method: flange type .
Heat resistance grade: A.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP42 (except for the rotating part of the output shaft).
The use of environmental humidity: 20 ~ 80%% ((not dew) SGMGH-09ACD2D.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGH-09ACD2D Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGMGH-09ACD2D&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Motor for high precision machine tool
SGMGH-55ACD6C
Yaskawa Motor for high precision machine tool SGMGH-55ACD6C
Servo motor SGMGH type. Rated speed: 100
Yaskawa
Motor for high precision machine tool
SGMGH-44ACC31
Yaskawa Motor for high precision machine tool SGMGH-44ACC31
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-13A2A3B
Yaskawa servo motor SGMGH-13A2A3B
Servo motor SGMGH type. Rated speed: 150
Yaskawa
Motor for high precision machine tool
SGMGH-20ACD3D
Yaskawa Motor for high precision machine tool SGMGH-20ACD3D
Servo motor SGMGH type. Rated speed: 100
Related download