Brand sort
OMRON WE70-CL-CN
Brand:
OMRON
Country: JAPAN
Name:
Model: WE70-CL-CN
Market price: U.S.$ 2930.88
(The following are the market open price not sales price!)
(The following are the market open price not sales price!)
next one: 
Last one: OMRON WE70-CL-CN
Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table WE70-CL-CN.
Action determine the color, can switch the green / Red 2 kinds of color display WE70-CL-CN
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, the maximum can be measured from 10ms to 320Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) WE70-CL-CN.
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: DPDT.
Lighting: LED; 12 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting) WE70-CL-CN.
included in lineup . Corresponding thermocouple type: K (CA).
Purpose: heat resistant.
Symbol: KX-2-G.
External: silicon outer foreskin.
Structure (element number / element diameter): 30/0.1.
Temperature range: - 20 ~ 150.
Tolerance: plus or minus 100 mu V.
Appearance color: blue.
A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation WE70-CL-CN.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions WE70-CL-CN. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
WE70-CL-CN Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=WE70-CL-CN&select=5
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table WE70-CL-CN.
Action determine the color, can switch the green / Red 2 kinds of color display WE70-CL-CN
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, the maximum can be measured from 10ms to 320Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) WE70-CL-CN.
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: DPDT.
Lighting: LED; 12 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting) WE70-CL-CN.
included in lineup . Corresponding thermocouple type: K (CA).
Purpose: heat resistant.
Symbol: KX-2-G.
External: silicon outer foreskin.
Structure (element number / element diameter): 30/0.1.
Temperature range: - 20 ~ 150.
Tolerance: plus or minus 100 mu V.
Appearance color: blue.
A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation WE70-CL-CN.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions WE70-CL-CN. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
WE70-CL-CN Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=WE70-CL-CN&select=5
...more relevant model market price >>>>
Related products
Related download