OMRON XS2F-D422-GA0-F

Actuator: Arm lever.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 1NC/1NO MBB (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms .
1NC/1NO, and 2NC XS2F-D422-GA0-F. Models with MBB contacts are also available XS2F-D422-GA0-F
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads. When the power supply capacity exceeds the power supply capacity of the inverter or the need to improve the power factor, it is required to connect the AC reactor XS2F-D422-GA0-F.
Please according to the maximum capacity of heavy load and light load rated conditions suitable for motor to select option . Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 49 (61).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater XS2F-D422-GA0-F.
Sensing Distance.
Ensures a sensing distance approximately 1 . 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 24 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Sensing method: Reflective type.
Sensing distance: 0 to 3 mm.
Output configuration: Turns ON when wafer carrieer is present XS2F-D422-GA0-F.
Cablee length: 2 m .
Photomicrosensors for detecting,
wafer-carrier mounting.
The mounting position is set with a pedestal.
The contact surface with the wafer carrier uses a special chemical,
resistant fluororesin.
The unique optical system enabless sstable detection of almost all,
wafer-carriers XS2F-D422-GA0-F.
Light modulation effectively reduces external light interference.
Utilizes talc-free clean cables.
XS2F-D422-GA0-F Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=XS2F-D422-GA0-F&select=5