OMRON G6E-134P-ST-US-H DC48

Number of beams: 18.
Protective height: 385mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions . Operating method: ncrementing and decrementing (selectable with DIP switch) G6E-134P-ST-US-H DC48.
Mounting method: Flush mounting G6E-134P-ST-US-H DC48
Input signal method (Count and reset inputs): Contact and transistor input, voltage (H and L).
Memory backup: Yes/No (Selectable using DIP switch).
Display: Yes (10-mm high 7-segment LED).
Models: 4 digits.
A DIN 72 x 72 mm Best-selling Counter G6E-134P-ST-US-H DC48.
Easy setting with thumbwheel switches .
A draw-out construction enables maintenance without rewiring.
Models with 2-, 4-, 6-, or 8-digit displays are also available.
Total Counter models are also Available.
Complies with UL and CSA Marking. Number of beams: 80.
Protective height: 1995mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality G6E-134P-ST-US-H DC48.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap .
Comes standard with interlock and auxiliary output functions. Display type: UP display timer (increments form 0 to the set time).
Output type: Contact output (SPDT).
Pin type: 11-pin.
Memory backup: provided.
Supply voltage: 100 to 240 VAC.
Rated time: 0.1 to 999.9 s.
Miniature DIN-sized (48 x 48 mm) Quartz.
Timer with Abundant Series Versions.
Series version cover a wide range of rated times; 9.999 s,
99.99 s, 999.9 s, 99 min 59 s, and 99 hrs 59 min.
Selection of elapsed time indication, remaining time indication,
contact output, and transistor output types to suit requirements.
Power supply freely selectable within a range of 100 to,
240 VAC, as well as 12 to 48 VDC.
Certified for UL and CSA safety standards. Size: 96 x 96mm.
Ontology: terminal type, temperature input type.
Category: control output 1 point type (power supply AC100 ~ 240V).
Shell color: silver.
Control output: relay output.
Control mode: standard or heating cooling.
Auxiliary output points: 3 points.
Heater with broken wire, SSR fault, heater over current detection function /ES1B power supply: single phase heater with detection function.
Event entry point: 2.
Transfer output: -.
Communication: -.
The general temperature controller 96mm, 48 * 96mm square has been upgraded to improve the performance and function of /.
Indicates that the accuracy of the upgrade, increase the function of prevention and maintenance, further enhance the performance.
Add PV/SV state display function, to see the statee of the thermoostat
(automatic / manual, RUN/STOP, alarm), interactive display PV/SV G6E-134P-ST-US-H DC48.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
Increased the 3 segment display, which cann ddisplay the current value / target / operation G6E-134P-ST-US-H DC48.
Increased the PF key, the distribution of automatic / manual, RUN/STOP, etc., can be a key operation.
G6E-134P-ST-US-H DC48 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=G6E-134P-ST-US-H DC48&select=5