OMRON A3SJ-90G1-24EG

Optical system: diffuse type.
Detection distance: 130 positive and negative 15mm.
Beam shape: linear beam.
Beam diameter: 600mm * 70 M.
Resolution: 3 m.
Cable length: 2m. Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Center roller lever.
Cable length : 3 m .
Compact Limit Switch That''s Also A3SJ-90G1-24EG.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard) A3SJ-90G1-24EG
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material A3SJ-90G1-24EG.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation A3SJ-90G1-24EG. )
VCTF oil-resistant cables with CE marking .
(Applicable only to standard models.)Number of beams: 64.
Protective height: 1920mm.
Safety Light Curtains with Durable,
Impact-resistant Body and Long,
20-m Sensing Distance.
MS/MSF4800A Advanced Series.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions.
Series connection is possible only with the MSF4800A.
Blanking can be set.
Muting is possible only with the MSF4800A by using the,
MS4800-RM6 Resource Module.
MS/MSF4800B Basic Series,
Features all necessary basic Safety Light Curtain functions.
Series connection is possible only with the MSF4800B.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions. A3SJ-90G1-24EG. Three-phase Phase-seequence Phase-loss .
Relay Using Voltage Detection Method.
Greater resistance to inverter noise.
Distinguishes between correct phases, phase sequence, and phase,
loss when power is turned ON.
Supports phase loss detection when the motor is operratting A3SJ-90G1-24EG.
5 A (resistive load) at 250 VAC, DPDT x 1.
Output status can be monitored using LED indicator.
Ideal to prevent reverse operation of motors.
A3SJ-90G1-24EG Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A3SJ-90G1-24EG&select=5