OMRON CS1W-CLK21

Detection methods: the firing pattern.
Detection range: 300mm.
Usage: slender type,
Small thin space probe;
Interference prevention function with close installationAppearance: Round/Projection type A22-T.
Output: SPST-NC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) CS1W-CLK21.
Install in 22-dia. or 25-dia. Panel Cutout CS1W-CLK21
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia CS1W-CLK21. panel cutouts.
Mounted using either open-type (fork-type) or closed-type .
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Type: input module.
Insulation: photo coupler.
Action indicator: there.
Logic supply voltage: DC4 ~ 32V.
Logic supply current: 25mA.
Input rated voltage: AC100 ~ 240V.
I/O solid state relay can be used for OMRON I/O type G7TC relay terminal CS1W-CLK21.
Input and output composite input module, the output module is complete .
Can be used for I/O type P7TF terminal. Can also be mixed with the I/O type G7T relay.
Can check the working status of SSR through the action indicator.
Have access to UL, CSA standard certification of the series of products have also been series (-US type)Single Cable Connection to PLC Means.
Space is Saved and Less Control Panel.
Wiring is Required.
Compact size: 182 (W) 85 (D) 68 (H) mm,
(8-point Output Block width is 102 mm).
Connects to the PC through the connecting cable,
(G79 Series) and connector, and requires only a,
snap-in operation.
Surge suppressor circuit built-in.
Immediate recognition of I/O signal status using,
LED operation indicators.
G3TA I/O Solid-state relay can be mounted instead,
of G7T.
Mounts easily on a DIN track.
Approved by UL, CSA (except for G7TC-OC16-1). Name: Safety Network Controller.
No. of I/O points: Safety inputs, 40; Test outputs. 8; Safety outpuuts, 8 CS1W-CLK21.
Unit version: 1.11 .
Directly Connected to SYSMAC.
CS/CJ Series via EtherNet/IP.
Monitors safety systems via EtherNet/IP.
Equipped with master functions of CIP Safety on DeviceNet.
Does not require external devices for connecting.
Safety Network Controller andd EEtherNet/IP CS1W-CLK21.
Increased maintainability in combination with,
OMRON’s EtherNet/IP compatible PLC.
ISO13849-1 (PLe) and IEC 61508 SIL3 certification.
CS1W-CLK21 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=CS1W-CLK21&select=5