OMRON 70156-3178 MS46SR-30-520-Q1-10

Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement .
Triple-seal construction to provide IEC IP67 degree of protection 70156-3178 MS46SR-30-520-Q1-10.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) 70156-3178 MS46SR-30-520-Q1-10
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Servo trunk unit.
Product Name: servo relay unit 70156-3178 MS46SR-30-520-Q1-10.
Application unit: CS1W/CJ1W/C200HW-NC__3, C200H-NC.
Specifications: - .
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Servo driver and control signal of position control unit,
Simple wiring on terminal stage.
The connector without soldering, with only a screwdriver can wiring 70156-3178 MS46SR-30-520-Q1-10.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installation, screw installation of two methods .
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
Type: open type.
Structure: bottom mounting type.
Capacity: 150W.
Output voltage: 15V.
Output current: 10A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device.
Built in support for determining the abnormal causes of the new under voltage detection function.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity.
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500WW outpput terminals)
Support finger touch protection to prevent electric shock 70156-3178 MS46SR-30-520-Q1-10.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable whhenn the fan is replaced by the customer 70156-3178 MS46SR-30-520-Q1-10. )
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)

70156-3178 MS46SR-30-520-Q1-10 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=70156-3178 MS46SR-30-520-Q1-10&select=5