MITSUBISHI A970GOT-TBD-B

Memory format: RAM.
Number of steps: up to 16000 steps can be used.
Battery support: required.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device. Input type: DC input, positive common end.
Input points: 2 points.
Input response time: 0 . 5ms below /1.5ms.
Rated input voltage / current: DC24V/4mA A970GOT-TBD-B.
External connection: 3 wire.
Cable type A970GOT-TBD-B
Minimum size of industry.
Can be like a cable, placed in the online slot.
The communication cable and the external equipment connecting cable is a type, and the wiring is simple.
Communication side, input and output side with cable (50cm). DB A20 AnyWire master station A970GOT-TBD-B.
Transmission distance: the longest 3km .
Data input and output: up to 1024 points.
Connect up to 128 units.
Enter 512 points, 512 points out of the output.
Support environmental protection, high speed, long distance transmission and special distribution system to support the special flat cable, universal VCTF cable, universal single wire cable and other cable.
Using original transmission mode, there is almost no branch limit,
Supports the automatic track and ring transmission,
Can also create suitable for small and medium sized factory wiring system A970GOT-TBD-B.
Support remote I/O, analog quantity, temperature and humidity terminal, anti false operation terminal and other equipment.
Up to 128 units from the station module
Can connect up to 128 units from the station module, for up to 1024 points (input 512 points / output 512 points) of the I/O control.
In addition, the parameters can be set through the switch, easy to set the transmission distance of 50m/200m/1km/3km. MITSUBISHI inverter series: FR-F840.
Voltage level: three phase 400V.
Power: 22.0kw.
SLD converter rated current: 47A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
2 times the power consumption of the wind turbine and pump and the speed of the 3 power consumption is proportional to the speed of the rotating speed.
Through the speed control of the frequency converter to adjust thhe air flow, can reducee the power consumption A970GOT-TBD-B.
Give full play to the performance of the motor.
The excitation current is always adjusted to the best state, which can improve the efficiency of the motor.
Load torque is smaller, can further improve energy efficiency.
For exxample, when a general motor is used, the optimal excitation control mode in the 4% motor load torque is about 30% more than that of the V/F control A970GOT-TBD-B.
A970GOT-TBD-B Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A970GOT-TBD-B&select=5