OMRON E5EC-CX2DSM-013

Actuator: Roller lever (resin lever, resin roller).
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms .
(Slow-action models with MBB contacts are available E5EC-CX2DSM-013. )
M12-connector models are also available, saving on labor and,
simplifying replacement E5EC-CX2DSM-013
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC E5EC-CX2DSM-013. Using a pushbutton enables,
accurately detecting difficult-to-detec objects .
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or reflectance of the bottoms of the cassettes.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms E5EC-CX2DSM-013.
Increased visibility with 4-direction indicator .
Optical detection of actuator operation provides a long life,
(mechanical life: 5 million operations min.).
Models available with PNP or NPN output.
Models are available with very flexible robot cable. Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NC + SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Application: General applications for purified water,
For small spaces (3-pole).
Separate Electrode Holders for Water.
Supply and Drainage Control in Builddings E5EC-CX2DSM-013.
Small, Lightwweight Electrode Holders for,
Use as Built-in Components .
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp wwater in buildings E5EC-CX2DSM-013.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
E5EC-CX2DSM-013 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E5EC-CX2DSM-013&select=5