OMRON F3SJ-A0845P20-01TS

Actuator: Roller lever R38.
Item: Hermetic seal, Molded terminals, -140 models; High-sensitivity.
Pretravel (PT): 10°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches F3SJ-A0845P20-01TS.
Standard-feature gold-clad crossbar contacts provide high reliability F3SJ-A0845P20-01TS
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models F3SJ-A0845P20-01TS. Appearance: 3 dia.
Sensing distance: 0.8 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NO.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia F3SJ-A0845P20-01TS. , 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available .
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hhinge for maximum switching power for motor loads,
as well as resistive and inductive loads F3SJ-A0845P20-01TS.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and betweeen the coil and contacts F3SJ-A0845P20-01TS.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
F3SJ-A0845P20-01TS Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=F3SJ-A0845P20-01TS&select=5