CA5-WPG8-01 | Proface CA5-WPG8-01 Waterproof rubber gasket

Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).Used to connect the SIEMENS S5 PLC series to the host computer interfaceMemory for extending EX GP-Pro alarm and character table functions.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)A1/A2/B+ DIO Type connector (compression type) (5 / set)Durable cable for connecting GP3000H adapter and GP3000H Proface CA5-WPG8-01 CA5-WPG8-01 For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface CA5-WPG8-01. Connect to PC, transfer screen data and user programs.AUX connector for external output (5 / set).Used to prevent disconnection of the connection (1 interface, 5 / set).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface CA5-WPG8-01. Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputFor 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models CA5-WPG8-01 Proface. (2 / set)When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) CA5-WPG8-01 Proface. 5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output CA5-WPG8-01 Proface CA5-WPG8-01. AUX connector, L typeThe main controller is connected to the man-machine interface for MPI communicationPortable GP2000H series models accessories, RS-232 single head cable (10 m).COM1 pin adappter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface CA5-WPG8-01.