LK166
Home >> Products >> OMRON >> Relay >> Power regulator >> G3ZA-4H203-FLK-UTU Multi-channel Power Controller OMRON G3ZA-4H203-FLK-UTU

G3ZA-4H203-FLK-UTU Multi-channel Power Controller OMRON G3ZA-4H203-FLK-UTU

Brand: OMRON
Name: Multi-channel Power Controller
Model: G3ZA-4H203-FLK-UTU
Name: Multi-channel Power Controller.
Number of control channels: 4.
Heater burnout detection: Supported.
Load power supply voltage: 100 to 240 VAC.
Optimum Cycle Control for High-precision.
Control with Low Noise.
Smaller than a Normal Power Controller.
Enables low-noise power control in combination with zero-cross.
SSRs. (See note.).
One Controller can control up to 8 SSRs.
RS-485 communications to set manipulated variables and,
heater burnout detection. The Smart FB Library for the G3ZA,
can also be used.
CE Marking.
Main Upgraded Functions.
Soft-start function added for lamp heaters.
Three-phase optimum cycle control added for three-phase heaters.
Combining with special CT for150-A current detection.
Note: The G3ZA must be used in combination with an SSR without the,
zero cross function when the soft-start function is used.

Input terminals: Compact slotted screw terminals (detachable).
Isolation method: Phototriaccoupler.
Zero cross function: Yes.
Operation indicator: Yes.
Alarm output: 2 outputs (Heater Burnout Detection,
SSR Short-circuit Failure Detection).
Applicable load (See note.): 2 to 25 A, 100 to 240 VAC OMRON G3ZA-4H203-FLK-UTU.
A New-concept SSR with Built-in.
Current Transformer.
Heater Burnout and SSR Short G3ZA-4H203-FLK-UTU
circuit Failure Detection.
Built-in Current Transformer (CT) helps reduce wiring steps.
Detects the burnout of any one of a group of heaters.
Detects the burnout of 3-phase heaters.
Detects SSR short-circuit failures.
Error detection level can be easily set with a switch.
Mounts to a DIN track or with screws OMRON G3ZA-4H203-FLK-UTU.
Three types of input terminals available: M3 terminals,
screwless clamp terminals (detachable), or compact slotted,
screw terminals (detachable).
Certified for CSA and EN (TÜV).
The G3PF-2@@B-@@@ Series is UL certified. Terminal (wire connection): Screw terminal.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: AC 110V.
Global standard size,
low profile slim I/O relay with width 6 OMRON G3ZA-4H203-FLK-UTU. 2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals G3ZA-4H203-FLK-UTU OMRON.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals G3ZA-4H203-FLK-UTU OMRON. ).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs G3ZA-4H203-FLK-UTU OMRON.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange G3ZA-4H203-FLK-UTU. New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays.
Now lead-free to protect the environment.
VDE certification (Germany).
Differeent colors of coil tape for AC and,
DC models to more easily distinguish them OMRON G3ZA-4H203-FLK-UTU.
MY(S) models with latching levers added for,
easier circuit checking.


...More relevant models >>>>