GP070-CL11 Proface GP070-CL11

2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)NETWORK FLEX 64 point DIO connector terminal block, (including 2)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface GP070-CL11 GP070-CL11 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Portable GP2000H series models accessories, RS-232 single head cable (10 m) Proface GP070-CL11. USB cable clamp for preventing disconnection of connection (5 / set)Converting 2 analog signals into digital signalsProvide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.Connect to PC, transfer screen data and user programs.For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening Proface GP070-CL11. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Adapter for EX module (5 / set)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).12 way 2 digital signals into analog signals and output resultsAdapter for EX module (5 / set)For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Connector for connecting DC power cord. (right angle, 5 / set)For the direct connection of the MITSUUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters GP070-CL11. USB cable to prevent disconnection of the fastening clip (5 / set)A connector that connects the DIO interface for connecting an external I/O devicee (5 sets) GP070-CL11. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Protection for GP rear connectors (large and small for each of the 1).