GP2000-CBLA/5M-01 Proface GP2000-CBLA/5M-01

NETWORK FLEX 64 point DIO connector terminal block, (including 2)For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Touch screen anti ultraviolet protective film (1 pieces).3.4 Inch Touch Screen anti UV protective film (1 pieces) Proface GP2000-CBLA/5M-01. GP2500S useCOM2 adapter for converting the COM2 interface to the RS-422 terminal block4 GP2000-CBLA/5M-013 Inch Touch Screen anti UV protective film (1 pieces).7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.For the man-machine interface hanging in the neck lanyard.For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set) Proface GP2000-CBLA/5M-01. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface GP2000-CBLA/5M-01.
Length of 5 meters. Used to prevent disconnection of the connection (1 interface, 5 / set).Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.LT seal on the control panel.Adapter for EX module (5 / set)Used to install the human machine interface to the fixed panel (2 / cover).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.The main body module and the separrate display module are used for connecting the main machine module and the separate display module in the DIN guide rail GP2000-CBLA/5M-01. 7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) GP2000-CBLA/5M-01. The main controller is connected to the man-machine interface of the host, for MPI communication