GP3000-DVI01 | Proface DVI input module GP3000-DVI01

Extension cable for connecting USB (Mini-B) interface to front panel.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.I/O module, including 32 point NPN/PNP inputExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Used to convert RGB to DVI-ATouch screen anti ultraviolet protective film (1 pieces) Proface GP3000-DVI01 GP3000-DVI01 The main controller is connected to the man-machine interface for MPI communication7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)10 Proface GP3000-DVI01. 4 inches (TFT), replace the backlight (2 / set)The main controller is connected to the man-machine interface for MPI communicationThe MITSUBISHI A series PLC is connected to GP, length: 5 m.Cable for connecting GP3000 to various modulesInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor output5 / setsScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceThe MITSUBISHI Q series PLC is connected to GP, length: 5 m Proface GP3000-DVI01. A veneer, for the GP4000 series back loading models of full flush (white, 1)Connector for connecting DC power cord GP3000-DVI01 Proface. (right angle, 5 / set)Suitable for LT4000M/GP4000M series modules, 5.7 inch. 5 GP3000-DVI01 Proface. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).For multi connection communication, length: 5 meters.Connector for connecting DC power cord (55 / set) GP3000-DVI01. 10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set) GP3000-DVI01 Proface. 1-0 DVI standard (DVI-D 24 pin convex connector)Portable GP2000H series models accessoriies, RS-422 cable with D-Sub connector (3 meters) Proface GP3000-DVI01. Apply to GLC-2600/2500Interface module for the simultaneous use of A/QnA/FX series external controller