Home
>> Products
>> MITSUBISHI
>> L series PLC
>> Analog/Temperature control module
>> L60AD2DA2-CM | MITSUBISHI Analog input / output module L60AD2DA2-CM
L60AD2DA2-CM | MITSUBISHI Analog input / output module L60AD2DA2-CM
Brand:
MITSUBISHI
Name: Analog input / output module
Model: L60AD2DA2-CM
Number of input channels: 2Ch.
Input voltage: DC - 10 ~ 10V.
Input current: DC0 ~ 20mA.
Conversion speed: 80 s/ch.
Resolution: 1/12000.
Output channel number: 2Ch.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA.
Conversion speed: 80 s/ch.
Resolution: 1/12000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output.
...More relevant models >>>>
Name: Analog input / output module
Model: L60AD2DA2-CM
Number of input channels: 2Ch.
Input voltage: DC - 10 ~ 10V.
Input current: DC0 ~ 20mA.
Conversion speed: 80 s/ch.
Resolution: 1/12000.
Output channel number: 2Ch.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA.
Conversion speed: 80 s/ch.
Resolution: 1/12000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output.
CC-Link/LT master station.
Transmission speed: 2.5Mbps.
Remote input / output: 1024 points.
16 point mode.
In the cabinet, the device can also respond to high speed.
CC-Link/LT link scan time to reach the highest 1.2ms (2.5Mbps) at 64 stations,
Excellent response performance is achieved.
Can be selected according to the transmission distance 2 MITSUBISHI L60AD2DA2-CM. 5Mbps, 625kbps, 156kbps.
Comfortable environment without network awareness L60AD2DA2-CM
Parameter settings that do not require any trouble.
Moreover, the transmission speed only through the master module to set, can easily use the remote I/O. Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use MITSUBISHI L60AD2DA2-CM. Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Can be used as a screw relay terminal.The built-in I/O function (Location: 1 axis) of the pulse output is converted to a differential drive output.Can be used to locate the wiring between drives.
Trunk terminal available for external input signal. Can be isolated to obtain DC24/48/100V, AC100/200V input signal MITSUBISHI L60AD2DA2-CM. Input points: 16 points.
Rated input voltage: DC24V.
Common way: 16 point / public end.
Input / output occupied points: 16 points (I/O distribution: 16 points).
External wiring connection: 18 point terminal L60AD2DA2-CM MITSUBISHI.
The input and output module is also called control module, which can output signal when there is control requirement,
Or provide a switch signal to the controlled device,
At the same time, the feedback signal of the equipment can be received to report to the host computer,
Is an important part of the fire alarm linkage system,
The input and output modules in the market can provide a pair of passive normally open / normally closed contacts,
For controlling the controlled equipment, the module of the part can be set by the parameters,
Set to active outpput, corresponding to the two input and output modules, multiple input and output modules, and so on L60AD2DA2-CM MITSUBISHI L60AD2DA2-CM MITSUBISHI MITSUBISHI L60AD2DA2-CM L60AD2DA2-CM.
Transmission speed: 2.5Mbps.
Remote input / output: 1024 points.
16 point mode.
In the cabinet, the device can also respond to high speed.
CC-Link/LT link scan time to reach the highest 1.2ms (2.5Mbps) at 64 stations,
Excellent response performance is achieved.
Can be selected according to the transmission distance 2 MITSUBISHI L60AD2DA2-CM. 5Mbps, 625kbps, 156kbps.
Comfortable environment without network awareness L60AD2DA2-CM
Parameter settings that do not require any trouble.
Moreover, the transmission speed only through the master module to set, can easily use the remote I/O. Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use MITSUBISHI L60AD2DA2-CM. Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Can be used as a screw relay terminal.The built-in I/O function (Location: 1 axis) of the pulse output is converted to a differential drive output.Can be used to locate the wiring between drives.
Trunk terminal available for external input signal. Can be isolated to obtain DC24/48/100V, AC100/200V input signal MITSUBISHI L60AD2DA2-CM. Input points: 16 points.
Rated input voltage: DC24V.
Common way: 16 point / public end.
Input / output occupied points: 16 points (I/O distribution: 16 points).
External wiring connection: 18 point terminal L60AD2DA2-CM MITSUBISHI.
The input and output module is also called control module, which can output signal when there is control requirement,
Or provide a switch signal to the controlled device,
At the same time, the feedback signal of the equipment can be received to report to the host computer,
Is an important part of the fire alarm linkage system,
The input and output modules in the market can provide a pair of passive normally open / normally closed contacts,
For controlling the controlled equipment, the module of the part can be set by the parameters,
Set to active outpput, corresponding to the two input and output modules, multiple input and output modules, and so on L60AD2DA2-CM MITSUBISHI L60AD2DA2-CM MITSUBISHI MITSUBISHI L60AD2DA2-CM L60AD2DA2-CM.
...More relevant models >>>>
Last one: MITSUBISHI Analog output module L60DA4-CM
next one: MITSUBISHI Temperature input module L60RD8-CM
Related download
Related model