PS300-WP00 Waterproof rubber gasket Proface PS300-WP00

Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Apply to GLC-2600/2500Data transmission cable between host and LT series. Length: 5 meters Proface PS300-WP00. NETWORK FLEX 64 point DIO connector terminal block, (including 2)15 inches, replaced by a host of backlight (1) PS300-WP00For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Connect to USB printer (Type-B).The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication Proface PS300-WP00. A1/A2/B+ DIO Type connector (welding type) (5 / set)Direct interface Matsushita Electric PLC FP series CPU port.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) Proface PS300-WP00. For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.10.4 inches (STN), the replacement of the host backlight (2 / set) PS300-WP00 Proface. For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card PS300-WP00 Proface PS300-WP00. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port PS300-WP00 Proface. Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin cooncave jointApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface PS300-WP00. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)