LK166
Home >> Products >> OMRON >> Control equipments >> Timer / time switch >> Analog timer >> Power OFF-delay Timer H3DK-HCL OMRON H3DK-HCL

Power OFF-delay Timer H3DK-HCL OMRON H3DK-HCL

Brand: OMRON
Name: Power OFF-delay Timer
Model: H3DK-HCL
Operating modes: Power OFF Delay.
Supply voltage: 100 to 120 VAC.
Control output: Contact output: SPDT.
H3DK-H: L Series (time range: 1.0 to 120 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series.

Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: DPST-NO.
Short-time range model (0.1 s to 10 min).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives OMRON H3DK-HCL. Easy to Use and Easy to Read H3DK-HCL
Basic Features.
Character height of 10 mm for better readability.
Operation is simplified by the Up Key for each digit.
Safety and Reliability.
Power supply circuit and input circuits are isolated inside the Counter.
Set value limit function prevents unexpected operation of output,
devices caused by setting mistakes OMRON H3DK-HCL.
Output counter function helps in managing the service life of the,
Counter or the load.
Other Features.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection. Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
No output: - OMRON H3DK-HCL.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified H3DK-HCL OMRON.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend H3DK-HCL OMRON.
External event input can be applied to a variety of measurement and identification situations.
Can enter DC0.001mV toTimer input: No-voltage input.
Display: 7-segment LCD.
Time range: 999h59min59s ←→ 9999h59.9min(switchable); Black body.
Seven digits, time range 0 to 3999d23 H3DK-HCL OMRON. 9h.
Dual time range: 999999.9 ←→ 3999d23.9h or,
999h59m59s ←→ 9999h59.9m. Type of input: AC voltage input.
Output type: relay contact; 1c HH; PASS, H, L, LL: each 1a.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suiitable voltage and current signal simulation, measurement and display, identification of the panel table H3DK-HCL.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for moniitoring the operation trend OMRON H3DK-HCL.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.


...More relevant models >>>>