Home
>> Products
>> MITSUBISHI
>> R series PLC
>> CPU module
>> R08ENCPU Programmable logic controller CPU MITSUBISHI R08ENCPU
R08ENCPU Programmable logic controller CPU MITSUBISHI R08ENCPU
Brand:
MITSUBISHI
Name: Programmable logic controller CPU
Model: R08ENCPU
Operation control mode: stored procedure repeated operation.
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 80K.
Increase the speed of a constant cycle interrupt program.
Perform a minimum interval constant period interrupt program can be shortened to 50 s,
Programmable logic controller can read more high-speed signals.
In addition, the interrupt routine can be set priority, and the interrupt program with high priority is executed when the interrupt processing is interrupted.
Therefore, when the signal is read at a high speed, the program can read the signal from the constant cycle of the conventional input module +CPU module.
Data management using database functions.
Data and production performance data through computer management in the past can be managed by database management of a built-in programmable controller.
Database can be created in the SD memory card, and can use the special instructions to easily add, update, retrieve, delete data.
In addition, the database can be imported and exported through the Unicode text file format,
Share data with spreadsheet software. In particular, can be flexibly used in the production of many varieties of food and beverage production line and other fields,
Effectively carry out the change of formula data and the management of production performance.
...More relevant models >>>>
Name: Programmable logic controller CPU
Model: R08ENCPU
Operation control mode: stored procedure repeated operation.
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 80K.
Increase the speed of a constant cycle interrupt program.
Perform a minimum interval constant period interrupt program can be shortened to 50 s,
Programmable logic controller can read more high-speed signals.
In addition, the interrupt routine can be set priority, and the interrupt program with high priority is executed when the interrupt processing is interrupted.
Therefore, when the signal is read at a high speed, the program can read the signal from the constant cycle of the conventional input module +CPU module.
Data management using database functions.
Data and production performance data through computer management in the past can be managed by database management of a built-in programmable controller.
Database can be created in the SD memory card, and can use the special instructions to easily add, update, retrieve, delete data.
In addition, the database can be imported and exported through the Unicode text file format,
Share data with spreadsheet software. In particular, can be flexibly used in the production of many varieties of food and beverage production line and other fields,
Effectively carry out the change of formula data and the management of production performance.
Analog output channel number: 4CH.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C: plus or minus 0.3%.
Temperature coefficient.
Conversion speed: 80 s/CH.
Channel to channel insulation
Output short circuit protection: have.
External power supply: DC24 MITSUBISHI R08ENCPU.
External wiring connection mode: 18 point screw terminal R08ENCPU
Voltage output
Digital input value: 32000 ~ 32000.
Analog output voltage: DC - 10 - 10V.
Current output
Digital input value: 0 ~ 32000.
Analog output current: DC0 ~ 20mA.
The analog output module is the interface of analog signal to the external output through the programmable controller.
Can choose voltage output, current output, voltage / current mixed output type for a variety of purposes of the module MITSUBISHI R08ENCPU.
High speed output flow simulation waveform.
The analog output module has the function of registering arbitrary waveform data to the module, and continuously executing the analog output according to the set conversion cycle.
Execute the analog quantity (torque) control of stamping machine and injection molding machine, can automatically output the control waveform,
Through the process of high speed, smooth control MITSUBISHI R08ENCPU. In addition, only prior to the waveform data are registered in the module,
Can easily control the analog waveform, so the production line control, such as repetitive control,
Without using a special program to create the waveform, can reduce the programming time R08ENCPU MITSUBISHI. Operation control mode: stored procedure repeated operation R08ENCPU MITSUBISHI.
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 320K.
Program capacity of up to 1200K.
Multi CPU system for high precision motion control.
The built-in CPU module support 2 Gigabit Network port.
Database functions to facilitate data management R08ENCPU MITSUBISHI.
Extended SRAM card with built-in security function.
Can be carried out a variety of motion control (position, speed, torque, advanced synchronous control, etc.).
In line with the international safety standards (13849-1 PL e ISO, IEC 61508 SIL 3) security CPU.
The most suitable for C/C++ language programming from the computer / computer environment for transplantation.
Standard interface.
The programmable controller CPU module has standardd Ethernet port, USB port, SD card slot R08ENCPU.
Ethernet port and USB port can be used to communicate with the corresponding peripheral devices,
SD memory card slot can be used to record data, databases and other data storage.
In additiion, the expansion of the SRAM card can be used for the expansion of the capacity of the soft element / tag memory and used as a hardware security key MITSUBISHI R08ENCPU.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C: plus or minus 0.3%.
Temperature coefficient.
Conversion speed: 80 s/CH.
Channel to channel insulation
Output short circuit protection: have.
External power supply: DC24 MITSUBISHI R08ENCPU.
External wiring connection mode: 18 point screw terminal R08ENCPU
Voltage output
Digital input value: 32000 ~ 32000.
Analog output voltage: DC - 10 - 10V.
Current output
Digital input value: 0 ~ 32000.
Analog output current: DC0 ~ 20mA.
The analog output module is the interface of analog signal to the external output through the programmable controller.
Can choose voltage output, current output, voltage / current mixed output type for a variety of purposes of the module MITSUBISHI R08ENCPU.
High speed output flow simulation waveform.
The analog output module has the function of registering arbitrary waveform data to the module, and continuously executing the analog output according to the set conversion cycle.
Execute the analog quantity (torque) control of stamping machine and injection molding machine, can automatically output the control waveform,
Through the process of high speed, smooth control MITSUBISHI R08ENCPU. In addition, only prior to the waveform data are registered in the module,
Can easily control the analog waveform, so the production line control, such as repetitive control,
Without using a special program to create the waveform, can reduce the programming time R08ENCPU MITSUBISHI. Operation control mode: stored procedure repeated operation R08ENCPU MITSUBISHI.
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 320K.
Program capacity of up to 1200K.
Multi CPU system for high precision motion control.
The built-in CPU module support 2 Gigabit Network port.
Database functions to facilitate data management R08ENCPU MITSUBISHI.
Extended SRAM card with built-in security function.
Can be carried out a variety of motion control (position, speed, torque, advanced synchronous control, etc.).
In line with the international safety standards (13849-1 PL e ISO, IEC 61508 SIL 3) security CPU.
The most suitable for C/C++ language programming from the computer / computer environment for transplantation.
Standard interface.
The programmable controller CPU module has standardd Ethernet port, USB port, SD card slot R08ENCPU.
Ethernet port and USB port can be used to communicate with the corresponding peripheral devices,
SD memory card slot can be used to record data, databases and other data storage.
In additiion, the expansion of the SRAM card can be used for the expansion of the capacity of the soft element / tag memory and used as a hardware security key MITSUBISHI R08ENCPU.
...More relevant models >>>>
Last one: MITSUBISHI Programmable logic controller CPU R04ENCPU
next one: MITSUBISHI Programmable logic controller CPU R16ENCPU
Related download