SGMAV-06ADA2C Ultra low inertia servo motor Yaskawa SGMAV-06ADA2C

YaskawaUltra low inertia servo motorSGMAV-06ADA2C

SGMAV-06ADA2C Introduce | SGMAV-06ADA2C Catalog / Manual / Instructions / Software download

Brand: Yaskawa
Name: Ultra low inertia servo motor
Model: SGMAV-06ADA2C
Sigma -V series servo motor SGMAV.
Rated output: 0.6kw (600W).
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with hold brake (DC24V).
Super power rate.
Small capacity.
Ultra low inertia
Instantaneous maximum torque (rating 300%).
Equipped with a high resolution serial encoder (20 bit).
Max speed up to 6000r\/min.
Variety is complete (50W ~ 1.0kw, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot，
Handling machinery，
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation

Large capacity servo unit.
Maximum applicable motor capacity: 55KW.
Power supply voltage: three phase AC400V.
Buckle: analog voltage \/ pulse sequence command type (rotary servo motor).
Design sequence: A.
Optional parts (hardware): paint.
Improve the performance of large torque transmission machinery!
Vibration suppression function Yaskawa SGMAV-06ADA2C.
When the driving system of the machine is vibrating, the observer is used to reduce the vibration and suppress the vibration of the device SGMAV-06ADA2C
Friction compensation function.
Even when the load fluctuation, the gain can be suppressed without changing the position deviation.
Therefore, the overshoot can be suppressed to ensure the stability of the device.
Feature tracking control Yaskawa SGMAV-06ADA2C.
Even the lower mechanical properties, but also the characteristics of the mechanical recovery,
Make the mechanical properties of the control action, thereby reducing the time to adjust the timeSigma -v series servo unit SGDV.
Maximum applicable motor capacity: 2kw.
Power supply voltage: three phase AC400V.
Design sequence: A type.
Interface: MECHATROLINK- III communication command type (rotary servo motor) Yaskawa SGMAV-06ADA2C.
Matching (hardware): base mounting type (standard).
Realize real time communication
With the maximum transmission speed of 100Mbps and the set of communication cycle 125S ~ 4ms, to achieve a more than 62 stations of the high speed control SGMAV-06ADA2C Yaskawa.
Through the high speed of communication, can send and receive all kinds of control information in real time SGMAV-06ADA2C Yaskawa.
Contribute to cost savings
A maximum of 62 stations can be connected to the communication line, can significantly reduce wiring costs and time.
The command connector of the upper controller only needs 1,
Pulse generator for D/A coonverter or position instruction without speed / torque command SGMAV-06ADA2C.
High precision motion control is realized SGMAV-06ADA2C Yaskawa.
In addition to torque, position and speed control, but also to achieve high precision synchronizzation phase control Yaskawa SGMAV-06ADA2C.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.

...More relevant models >>>>