LK166
Home >> Download >> OMRON >> Manual Download >> OMRON D4N-8DLE INSTRUCTION sheet PDF

OMRON D4N-8DLE INSTRUCTION sheet PDF

Brand: OMRON
Product model: D4N-8DLE
Name: safety limit switch
Sort: INSTRUCTION sheet
File language: English
File size: 0.61MB
Action force (OF):0.49N (low load action type).
Switch timing: short circuit type.
Drive rod: needle shaped button type.
Super small check switch with push button action type
Super small (6 x 8 x width high depth 4 D4N-8DLE PDF. 2mm), light weight (about 0.3 grams), long stroke 3mm.
Short circuit and non short circuit time built-in sliding device capable of selecting switch.
Widely used in small household electrical appliances, audio equipment, office equipment, communication equipment, etc D4N-8DLE.
Actuator: Adjustable roller lever, form lock (metal lever, resin roller).
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 2NC/1NO (Slow-action) D4N-8DLE PDF.
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement D4N-8DLE PDF.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Actuator: Plunger.
Conduit openings: M20.
1NC/1NO (Snap-action).
Robust safety limit switch with metal housing OMRON INSTRUCTION sheet.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Saffety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever OMRON INSTRUCTION sheet D4N-8DLE Manual.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion.
Head seal structure strengthened to improve seal properties OMRON INSTRUCTION sheet.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Ratings: Standard load; 5 A at 125 VAC.
Cable: VCTF cable *2.
Actuator: Plastic rod.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
CCable lengths of 3 and 5 m available on standard models D4N-8DLE INSTRUCTION sheet.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation D4N-8DLE Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Safety Limit Switch
D4N-6D2G
OMRON Safety Limit Switch D4N-6D2G
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-6C62
OMRON Safety Limit Switch D4N-6C62
Actuator: One-way roller arm lever horizonta
OMRON
Safety Limit Switch
D4N-2C32
OMRON Safety Limit Switch D4N-2C32
Actuator: Roller plunger. Conduit size: 1-co
OMRON
Pull-reset Safety Limit Switch
D4N-1D32R
OMRON Pull-reset Safety Limit Switch D4N-1D32R
Actuator: Roller plunger. Conduit size: 1-co