OMRON E2E-X2D1-M1-Z

Number of beams: 112.
Protective height: 2270mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Appearance: Rectangular (M16-J) .
Lighting: LED without Voltage Reduction Unit, 12 VAC/VDC E2E-X2D1-M1-Z.
Degree of protection: IP40.
Display color symbol: R: red; Y: yellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white E2E-X2D1-M1-Z
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch. Model: A7MD/A7MD-@-D.
Classification(See note 1.): Mounts via printed circuit board E2E-X2D1-M1-Z.
Character height: 2.8 mm.
Terminals: PCB terminals .
Color: Black.
Output code number: 06 (binary coded decimal).
Ultra-small Thumbwheel-operated.
Switches.
High reliability achieved with gold contacts. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load.
Zero cross function: Yes.
Rated input voltage: AC 100V.
Global standard size,
low profile slim I/O relay with width 6 E2E-X2D1-M1-Z. 2 mm,
slim I/O solid state relay .
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Name: Temperature Controller (See note 1.).
Power supply: 24 VDC.
No. of control points: 2.
Control output: Transistor output.
Auxiliary output: Transistor output: 2 pts (sourcing).
Functions: Heater burnout alarm (See note 3.), Heating or heat/cool,
control is selectable (See note 4.)Event input: 1 point per Unit.
Communications functions: RS-485.
Input type (See note 5.): Thermocouple.
New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperaturre Controller itself caan be replaced without,
changing terminal wiring E2E-X2D1-M1-Z.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements.
Front-panel LED indicators for easy operation monitoring.
Power supply and communicatiionns wiring not required between,
Units when mounted side-by-side E2E-X2D1-M1-Z.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance.
E2E-X2D1-M1-Z Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E2E-X2D1-M1-Z&select=5