Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> photoelectric sensor amplifier built-in
>> E3S-GS1E4 OMRON Small Spot/Mark Sensor with Built-in Amplifier
E3S-GS1E4 OMRON Small Spot/Mark Sensor with Built-in Amplifier
Brand:
OMRON
Name: Small Spot/Mark Sensor with Built-in Amplifier
Model: E3S-GS1E4
Sensing method: Grooved type.
Appearance: --.
Connection method: Pre-wired .
Sensing distance: 10 mm.
Model: NPN Voltage output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors.
...More relevant models >>>>
Name: Small Spot/Mark Sensor with Built-in Amplifier
Model: E3S-GS1E4
Sensing method: Grooved type.
Appearance: --.
Connection method: Pre-wired .
Sensing distance: 10 mm.
Model: NPN Voltage output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors.
Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 27 (39).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor E3S-GS1E4 OMRON.
Problems such as the collision of workpieces are eliminated E3S-GS1E4
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type E3S-GS1E4 OMRON.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NO. Appearance: T-shaped.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that is still easy to use E3S-GS1E4 OMRON.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 39 (53).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M188 and,
M30; both long and short barrels) E3S-GS1E4.
Modular construction simplifies customization. E32-A04-1 type: special beam type; wafer mapping,
Specialty: ultra thin type (t=2mm); opening angle 3 degree adjustment optical axis after the factoory,
Bending radius (mm): R10 E3S-GS1E4.
Fiber element for meeting diversified needsFixed type barcode reader of ultra small, low cost and high dependence on CCD.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 27 (39).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor E3S-GS1E4 OMRON.
Problems such as the collision of workpieces are eliminated E3S-GS1E4
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type E3S-GS1E4 OMRON.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NO. Appearance: T-shaped.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that is still easy to use E3S-GS1E4 OMRON.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 39 (53).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M188 and,
M30; both long and short barrels) E3S-GS1E4.
Modular construction simplifies customization. E32-A04-1 type: special beam type; wafer mapping,
Specialty: ultra thin type (t=2mm); opening angle 3 degree adjustment optical axis after the factoory,
Bending radius (mm): R10 E3S-GS1E4.
Fiber element for meeting diversified needsFixed type barcode reader of ultra small, low cost and high dependence on CCD.
...More relevant models >>>>
Last one: OMRON Small Spot/Mark Sensor with Built-in Amplifier E3S-GS Series/E3S-VS Series
next one: OMRON Identification sensor E3S-GS1C4
Related download