PS600-BU00 | Proface PS600-BU00 Backlight

For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Connector for connecting DC power cord (5 / set).Touch screen anti ultraviolet protective film (1 pieces) Proface PS600-BU00. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputGP2500S useConnector for connecting DC power cord PS600-BU00 (linear, 5 / set)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).Disposable battery (1 blocks) for backing up clock data.Used to prevent disconnection of the connection (1 interface, 5 / set) Proface PS600-BU00. 10.4 inches (TFT), the replacement of the host backlight (1).A veneer, for the GP4000 series back loading models of full flush (white, 1)B/B+/C FLEX NETWORK Type connector (5)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfacePortable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters) Proface PS600-BU00. CFast cards (32GB, SLC,) inserted in the CFast slot for storage.5 / setsLength: 5 meters.Clock battery, save system date and time when power is off.Portable GP2000H series models accessories, RS-422 single head cable (10 m) PS600-BU00 Proface. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)The module is used for mounting on the back board of the GLC2000 series host computer PS600-BU00 Proface. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.Expansion module for the GP3000 access to the DeviceNet network and communnication with the DeviceNet master stationFor connecting GP operation data with D-Sub RS-232C and power /DIO terminals PS600-BU00 Proface PS600-BU00. For thin film surface protection of man-machine interface from fingerprints, water dropletss, dust and oil pollution (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface PS600-BU00. (1)